Electronics Forum | Thu Sep 20 02:50:30 EDT 2012 | haiae
Thank you for your message. After many trying to find the error I found the cause. The reason is dirty linear scale glass for head one and after clean it the machine can homing easy. I hope this inform may helpful for user who are using contact machi
Electronics Forum | Thu Sep 23 11:37:43 EDT 2010 | flipit
I had 4 of these machines. They are good machines but I have seen this error often. Is the problem only on one head L or R? If so swap electronics L to R and see if it follows. You can even swap the Y motors. The items that could cause this prob
Electronics Forum | Mon Sep 12 22:50:52 EDT 2022 | superlen
Poly, I've seen the same error occur with our GI-14 when the glass scale encoder is simply dirty. If you bought the machines used, they could have been stored in fairly dirty environment. Just clean the glass scale. (use caution). We use lint free cl
Electronics Forum | Wed Sep 25 09:59:44 EDT 2013 | bobpan
Hello, This is from my old documents....hope it helps. I would first try mod code 53 = 2 first.....if the machine is a 2C. The motor was known for causing this problem after getting old. These are all resolutions for motor error 4. Step Potential P
Electronics Forum | Wed Nov 09 05:12:43 EST 2011 | bobpan
Motor error 4 is an error that is caused by the machine not reaching a position in a timely matter. Usually its in the x/y axis but also could be z. If you have cleared the mod codes (function 35 shift 7) the machine should home. Usually this problem
Electronics Forum | Mon Jun 05 22:40:40 EDT 2000 | Dean
...well, if I had Fuji in on 4 occasions and the problem is not resolved I would wonder what exactly I paid for... Here is what I would do. 1. Run the glass plate program. This will eliminate variables in your production parts and boards. Additi
| 1 |
