Electronics Forum | Tue Aug 12 13:40:08 EDT 2008 | ck_the_flip
GR@ICS: Are you drag soldering or point-to-point soldering? Keep in mind. Drag soldering mimics wave soldering. Molten solder is contacting and dragging across the solder mask. Keep in mind, too, that "semi-matt" or "semi-gloss" will also tend to
Electronics Forum | Fri Sep 06 06:11:40 EDT 2013 | fnorradd
Hi All, We have purchased an Ersa Versaflow selective solder machine, and I am looking in to profiling upon the machine. We currently have a process for profiling our wave with a WaveRider system, this we use to gauge that the machine is set up cor
Electronics Forum | Tue Jul 21 05:08:16 EDT 2020 | arty vesna
Hi there. I am currently kinda in the same spot as the author of the thread. My choice is between Rehm VXC and Heller 1809. I am a little concerned about Heller advertising their 25cm/10 in zones. I am used to large ovens designed for high throughput
Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler
We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs
Electronics Forum | Thu Jun 10 13:29:21 EDT 2021 | edgar_smt_ap
Good morning. What should be the Oxygen content Standard in an Oven? Here in my company, we have an ERSA reflow Oven, and we work with Lead Free solder paste. According to Work Standard documents send by my company corporate, the PPM Oxygen conte
Electronics Forum | Fri Apr 20 14:02:26 EDT 2007 | JJ
RA, First, define "medium scale budget". Aside from that, I have used many systems, listed in my order of preference: 1. SRT1100 - superior board support - very reliable 2. ERSA IR550A - unique flexability due to infrared heaters 3. Metcal APR5000 -
Electronics Forum | Tue Jan 22 15:33:20 EST 2013 | hegemon
Funny how things can be looked at from two sides. Not sure what would be considered low volume in the above post. Our first KISS machine has been producing product for well over 4 years now, double shifts every day, and about 50% of the saturdays
Electronics Forum | Wed Jun 01 19:31:03 EDT 2016 | marcelll
Strange problem with a Versaflo selective wave Very long for the pot to reach is set temperature ( 5 h ) At 180 C, the pump doesn’t seem to start like it should be So very long to heat the bottom of the pot Finally, the bottom element is turning on