Electronics Forum | Wed Feb 02 19:55:31 EST 2022 | dwl
you may also want to try replacing the Motor capacitor. This is often the culprit on those blower motors. I found them on Amazon for $3. much better then $450 for a new motor.
Electronics Forum | Tue Jan 11 13:29:45 EST 2022 | bmalhi
You can purchase full motor assemblies directly from Heller. Please contact service with oven serial numbers and motor location ServiceNJ@hellerindustries.com.
Electronics Forum | Tue Feb 01 10:25:24 EST 2005 | Scott Baker
Jay - I read your report and was interested to see that you ran your evaluation on a Heller 1500 5 zone. We have been hearing for some time that a larger machine (7 zone min)with higher temp heaters and fan motors would be required. Is yours a "hi t
Electronics Forum | Sat Jan 18 12:07:44 EST 2014 | jimmyboz
Oh yeah, the x-motor cooling fan too.
Electronics Forum | Tue Jan 04 13:00:07 EST 2011 | bk
The only x fan i can think of would be the x belt motor fan which is on the back of the black box sticking out of the back of the machine. If it's a heat issue then first thing to do is replace the 2 filters behind the 2 vented covers located on the
Electronics Forum | Thu Jul 20 11:18:43 EDT 2006 | ev
Paul, the error says "MOT1-38-247 MSETDYNX: Xwagon fan not working." I have checked...the X motor fan and it is working...the fan behind the PAIB board is also working...I checked this because there is a connector marked X wagon fan on the PAIB boa
Electronics Forum | Mon Sep 27 20:14:37 EDT 2021 | cbeneat
For what it's worth, we have 5 Vitronics ovens. XPM2, 2+, 3I, 3M. Our Oldest is an XPM2-1030 as mentioned. We have never replaced a fan motor. We've been running it for 3 shifts for 16 years. A couple of the gearboxes for the conveyor width have been
Electronics Forum | Tue Apr 08 08:01:35 EDT 2014 | cyber_wolf
So we had a ringblow pump blow up in our CP642. We replaced it and now we are getting hardware NG errors very intermittently.(2-4 times during and 8 hour shift) I see that the x-motor fan, cam motor fan,and oil cooler are all in this circuit. When i
Electronics Forum | Mon May 11 23:16:20 EDT 2020 | richgreen01
Hi I am having issues with fumes coming from my oven,mainly when running lead free paste,it does not have a traditional motor or fan mounted inside but has a modified top extruding motor with a rod leading to the fan inside. So the top is open to a
Electronics Forum | Sat Dec 17 16:46:45 EST 2011 | eadthem
Startup current depends on your configuration. ours dose zones 1,2/ 3,4/ 5/ 6,7 last i checked it pulled about 40-55 ish on start up and 25-35 during run. our profile is a slow ramp till 170c then a fast ramp to 285c 280c(last 2 zones). 1707's
winsouce.jpg)
