Electronics Forum | Wed Jan 06 12:51:39 EST 2016 | scotceltic
Is anyone aware of any easy to use conversion software that will take a current Fuji Flexa SMT program and create an ASM (Siemens) SMT program. I am aware of the 3rd party vendors (Circuitcam by Aegis, Valor etc.) but most of these require most or al
Electronics Forum | Wed Apr 14 08:36:10 EDT 2004 | Mark
Just jump into Fuji Flexa cause its the latest and from what I have used of it very simple to use.
Electronics Forum | Sat Jan 23 00:20:22 EST 2016 | jlawson
Program conversion bewteen the two can be done , with a custom program. Issue is at what value as most simple conversions will be file based - and placement level NC data only. Part Shapes are where all the work is and if you want to convert part l
Electronics Forum | Thu Jan 07 03:26:58 EST 2016 | sarason
My program PCBSynergy generates over 80 SMT formats. Unfortunately it only does the Siemens *.NC format at the moment. If you send me a copy of the format and the CAD file or the XYR file in a spreadsheet, which generated it. I can easily add it, esp
Electronics Forum | Tue Oct 11 07:54:26 EDT 2005 | Mark
254 (odd parts) ........ go into the Flexa program and go over the vision number and click on it and than hit F1 for a list of numbers.
Electronics Forum | Wed Feb 18 12:14:12 EST 2009 | jdengler
Hi aj, I've never done Flexa programing, but in MCS2 I made it 1C1 for C1 on board 1 and 2C1 for C1 on board 2 etc. I did this in a spread sheet for each board then copy and paste each data set into 1 spreadsheet then saved as text and imported int
Electronics Forum | Thu Jun 09 11:07:31 EDT 2005 | vikkaraja
I work for a rather large company. what job title do I fit in? My current title is maintanence Tech. III. What do I look for, beacause maintanence is a very broad term. I do fuji Flexa programming, Fuji smt reapair troubleshooting, MPM solder print
Electronics Forum | Wed Feb 04 10:53:20 EST 2004 | RNH
I have Flexa with the circuitcam interface. Works great for importing cad file into circuitcam and then exporting program into Flexa. I don't use the documentaton side of circuitcam much.
Electronics Forum | Mon Jul 19 11:58:47 EDT 2004 | Mark
Oops I forgot to add the reason for the switch obviosily was the Fuji Flexa and needed for machine programming and CAD support.
Electronics Forum | Wed Feb 18 11:36:37 EST 2009 | aj
Hi all, I have a proto build of 3 cards - the 3 cards are being supplied on the same panel. what is the best way to program this on Fuji Flexa - each card will have a lot of the same references e.g C1 , C2 etc... aj...
