Electronics Forum | Thu Dec 13 15:35:14 EST 2007 | mulder0990
Our plant does not use an automated process, but I have done some research to the LPF Label Feeder by hover davis. It is for the Fuji IP, QP2, QP3, XP. Hope that will point you in some direction or get this thread started.
Electronics Forum | Fri May 22 07:59:14 EDT 1998 | Jerry
We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision syste
Electronics Forum | Thu May 28 18:16:40 EDT 1998 | Ian Bates
| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys
Electronics Forum | Fri Jun 26 13:52:05 EDT 1998 | jcc
| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys
Electronics Forum | Tue Jun 09 00:31:56 EDT 1998 | Dave McDermid
| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys
Electronics Forum | Thu Feb 07 05:18:08 EST 2008 | muarty
If there is a budget available, rather than looking at a Fuji CP7. Being issued with small strips of components would prove to be a nightmare with this style of placement machine. I would try to consider the Fuji AIM machine for use as the chipshoote
Electronics Forum | Mon Oct 11 17:15:03 EDT 1999 | Mike H
| Just curious as to everyones thoughts on if you could chose to use F4G or an MCS-30. Which would you chose and why? | | | Larry J | |Larry, depending to your Fuji machines, if you are using any new machines like QP1 or QP2 and any other ones li
Electronics Forum | Wed Jun 10 17:13:56 EDT 1998 | FAC
Fuji formed a partnership with UniCam Software to better meet our customers expanding software needs. The resulting product, FujiCam, is based on UniCam's field proven programming tool (4 years on market) and provides greater management of the entir
Electronics Forum | Thu May 28 22:02:09 EDT 1998 | Ian Bates
Jerry, I have been using the QP in a Proto and Production environment for about a Year and once the PD is Created(which may take some time) and vision processes. I rarely ever need to make further changes. As far as BGA Pd's. They are a Little
Electronics Forum | Tue Jun 11 15:56:43 EDT 2002 | mjabure
Actually F4G is a programming environment similar to panatools, not a machine, it stands for "Fuji 4th Generation". The connection being questioned is to the communication network, and yes with the proper hardware you should be able to connect more t
| 1 |
.gif)
