Electronics Forum | Tue Feb 26 04:55:32 EST 2002 | mustservices
to use the fuji america office you have to be a registered customer, which we are not since we are based in the uk. we cannot go to the uk fuji agent either
Electronics Forum | Thu Jun 05 20:26:10 EDT 2008 | jgarver1
You should try to contact Astro (Fuji Rep) in the UK? They are very knowledgable.
Electronics Forum | Tue Feb 26 05:52:35 EST 2002 | mustservices
basically i am looking for a list of parts that would be required to be changed in an annual service for the qp242 and cp642. this information will not be relaeased by astro or fuji america or fuji japan as we are a competitior to astro in the uk, so
Electronics Forum | Tue Feb 26 05:56:14 EST 2002 | mustservices
basically i am looking for a list of parts that would be required to be changed in an annual service for the qp242 and cp642. this information will not be released by astro or fuji america or fuji japan as we are a competitior to astro in the uk, so
Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Thu Sep 14 11:15:15 EDT 2000 | Graeme
I also have and run a FGL1 I checked the rack in our machine and there are nine slots numbered left to right slot 1 VM1110TA,slots 2,3,and 4 none slot 5 VM1520, slot 6 VM1510, slot 7 VM1530, slots 8 and 9 none.Have you tried Astro Technology ltd Tel
Electronics Forum | Thu Sep 14 11:15:34 EDT 2000 | Graeme
I also have and run a FGL1 I checked the rack in our machine and there are nine slots numbered left to right slot 1 VM1110TA,slots 2,3,and 4 none slot 5 VM1520, slot 6 VM1510, slot 7 VM1530, slots 8 and 9 none.Have you tried Astro Technology ltd Tel
Electronics Forum | Tue Feb 26 05:14:48 EST 2002 | saiwong
Thru. the Astro Technology UK. They might sell the parts to you.
Electronics Forum | Fri May 28 08:46:29 EDT 2004 | pjc
Fuji Spares 67 Northwood Cres Bradford BD10 9HU (Road Map) West Yorkshire Tel: 01274 418951 Fax: 01274 622834 Internet: http://www.fujispares.co.uk
Electronics Forum | Thu Jun 18 19:17:16 EDT 1998 | Ben Salisbury
| I am currently using some pick & place equipment and would like to measure their cpk using a glass plate and glass "components" with vernier scales. I have seen these kits but am trying to track a supplier down in UK/Europe. | Any help is much appr
.gif)
.gif)
