Electronics Forum | Fri Dec 09 01:05:11 EST 2022 | varun
We have a Mirtec MV-3U AOI machine. Can someone help me to find a way on how to save the image of the board along with the report after the inspection is complete? Currently it only saves the report with the errors showing on the template image which
Electronics Forum | Wed Aug 12 17:41:15 EDT 2015 | edwaterfall01
Sorry for all the typos in the last message. As the machine was powered OFF for two weeks I would have expected a battery problem. Can you capture a Logicimm file and see what the file says before the heart beat messages?
Electronics Forum | Thu Jan 12 20:54:30 EST 2023 | cbeneat
When I see that on ours, I take the nozzle off and clean the tip. Any build up and the machine throws that error. Do a set check on the head and then look at the image of the nozzle in question...OR we hit resume and the machine ignores it until the
Electronics Forum | Thu Feb 14 12:04:10 EST 2019 | slthomas
Can you take a picture of the front and back sensors? That might help me understand the situation. I wish I still had the visual images stored from 11 years ago but that ship has sailed!
Electronics Forum | Fri Dec 22 20:28:44 EST 2017 | 1232kade
Hi everybody. I have some problem that i cant solve, someone pls help me... My Mounter Juki FX-1R cant origin. When i try to origin, the problem appear ( see attach image ) I can control air devices like ATC plate, nozzle,... But cant origin and cont
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
Electronics Forum | Mon Feb 10 08:18:18 EST 2020 | astarotf
Hi We have an Accuflex MPM with camera vision problems which shows no image, only the screen looks gray. With the diagram we show that our MPM camera is receiving the appropriate 12V voltage on pin # 6 of the camera and supplies the video output on p
Electronics Forum | Mon Jun 10 14:10:08 EDT 2019 | griinder
I am able to create a single board program using gerber and centroid, and teaching footprints. I can then assign 2 global fids(a third never seems to display in Ceditor), and export my pad file. I then open it in ceditor and export the job file. Load
Electronics Forum | Tue Mar 16 03:20:39 EDT 2021 | cosimaliu
please try to Replace the image card of IP-X5 and confirm whether the problem is solved. cosima@qy-smt.com
Electronics Forum | Wed Jun 17 01:02:16 EDT 2015 | armandogomez
Hello Had a similar problem way back with the hydra, first go to the service program manually activate the hydra camera then move the Xwagon to place the hydra ref plate over the hydra camera and check first if the camera works, second the image you
winsouce.jpg)
