Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Fri Apr 02 04:02:18 EDT 2010 | manju2cool
Hi, I think concept of inspection through AOI is changing. I am struck in confusion.Because some manufacturer say 3D inspection, with 1+4 cameras is ultimate solution. Orbotech also came with 13 cameras at once!Now some say, all these are eyewashing
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Tue Apr 15 08:38:23 EDT 2003 | pjc
Don't have any specific links to papers and articles. Try searching on the IPC.org (plus APEX show http://www.goapex.org) and SMTA.org web sites. Any papers and articles on the process from equipment mfg.'s should be taken with a grain of salt. Sold
Electronics Forum | Sat Nov 07 14:05:43 EST 2009 | doremi
Hi, I have 4 years as an AOI Process Engineer and we are working with 3 types of AOI - Marantz 22X, VI3000 and Omron (RNS & VT-WIN2). For solder joint inspection (solder meniscus quality, insufficient solder, wetting problems, shorts (bridges) Omron
Electronics Forum | Fri Oct 30 08:12:10 EDT 2009 | rajeshwara
HI NEMO , I HAVE GOOD EXPERIENCE OF PDT AOI SUPPLIED BY SAMSUNG TECHWIN IT IS CAPABLE OF HANDLE SUCH THING AT GREAT LEVEL ,JUST NEED GOOD UNDERSTANDING OF PROGRAMMING AND DEBUGGING , WE ACHIEVED 100 PPM WITH HELP OF IT , U GO FOR 5 CAMERA WHICH WIL
Electronics Forum | Fri Oct 30 12:48:59 EDT 2009 | dannou
I've been the AOI programmer for around 5 years now. The equipment I use is the Orbotech VT-9300 & VT-9500 systems. The programming isn't too difficult, mostly Grey-scale shadow measurement through application algorithms. Three levels of lighting an
Electronics Forum | Thu Oct 29 21:16:15 EDT 2009 | mah115
Fellows, We are considering getting an AOI machine to inspect boards that our vendors are giving us (we outsource the assembly of PCBAs). We have low volumes of boards, but every time a defect does slip by our human inspectors, it causes a lot of
Electronics Forum | Wed Feb 05 08:51:13 EST 2014 | emeto
What I think it does is to calibrate the camera. You have your tube on the bottom and your camera on the top. For my machine(Dage) I have to put the board I am going to examine inside and select a point on the board surface. THen I just click on this
Electronics Forum | Sat Feb 12 10:15:40 EST 2000 | Rick Thompson
I have to agree with Michael's comments. We've been evaluating systems for a month or so. There's a pretty wide range depending on what you're looking for. I'd say the first thing needed is to define your expectations. Are you looking for solder in
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
.gif)
