Electronics Forum | Tue Jul 29 13:11:24 EDT 2008 | gabriella
go with the longest one possible. Doesn't metter what brand.
Electronics Forum | Mon Sep 25 14:57:53 EDT 2006 | jdengler
John, Your calculation looks fine. If that's all you were looking for your done. If you really want to produce more boards per day we would need more info. Size of board, can it be panelized or larger panel. Your line configuration and what mac
Electronics Forum | Tue Aug 30 15:39:37 EDT 2005 | esoderberg
We are experiencing cracking of 1206 .1uf/50V capacitors on our boards. Design is keeping the caps away from the board edge 0.200 and perpendicular to the longest edge but still they crack even in the interior of the board. Recommendations? bds are
Electronics Forum | Thu Jul 06 14:55:07 EDT 2006 | scotceltic
The funny thing about this e-mail trail is that it is one of the longer ones on here ...... It seems the controversial threads last the longest. At least I enjoyed it. What's my point you might ask ??? Just ignore the threads you don't find inter
Electronics Forum | Tue Feb 23 09:26:34 EST 2016 | tombstonesmt
Good to hear! Never dealt with an assembly that large. 24" is the longest we've built. One issue we encountered was bowing due to the vacuum seal being too tight. Bowing caused transfer issues between conveyors and equipment. -TSS
Electronics Forum | Fri Nov 08 14:42:31 EST 2019 | rlising
Hi, wondering if anyone has encountered a magazine loader & magazines that hold 550mm in length. We are designing led strips and that is our longest config. All I have been able to find is 535mm with 50 slots. Any help would be appreciated. Than
Electronics Forum | Wed Oct 16 17:25:09 EDT 2002 | kenbliss
Since all seriousness seems to have disappeared on this thread. I can�t wait to see the new headline slogan Nepcon West 2002 the longest running assembly show, learn the latest techniques in PC board assembly, wave soldering, and frying twinkies.
Electronics Forum | Sun Aug 27 20:30:53 EDT 2006 | darby
AJ, We use all ENIG boards. After opening, any remaining boards are kept in low humidity keeping cabinet. I have never experienced a problem using this method I think the longest I have kept them this way is eighteen months. We also store any open tr
Electronics Forum | Wed Jun 19 16:18:11 EDT 2024 | proceng1
One thing that I did to eliminate 1 set of variables is I calculated the slowest belt speed that puts the board in reflow for the longest time spec'd for by the paste manufacturer. So every recipe runs at that belt speed. Eliminating the juggling o
Electronics Forum | Wed Nov 17 11:36:16 EST 1999 | JAX
If this is going to be the beginning of a lucrative and fast growing company you probably want to go with Fuji ( CP series ) , it's by far the fastest and longest lasting. If money is a big issue at this time and you want to get the biggest bang for
.gif)
