Electronics Forum | Thu Nov 07 09:06:09 EST 2013 | detecheurope
Hi Suresh, Detech Europe are a supplier of new and second user Mirae SMT pick and placement machinery in the UK. We currently have a fully refurbished Mirae MPS-1010 dual gantry chip shooter available with feeders. We can provide both installation a
Electronics Forum | Tue Feb 15 04:07:17 EST 2005 | Rob
Yes we have come across 24x20, & we have a couple of feeders set up for it, & no it's not that common a part but you can't be the only Mirae user who has ever tried. What do Mirae have to say?
Electronics Forum | Tue Feb 15 07:07:58 EST 2005 | bobpan
The mirae machine does have the setting for 20mm pitch....it can be set on the machine software but i dont believe its on the offline software.. thanks
Electronics Forum | Mon Feb 14 17:36:37 EST 2005 | griinder
WE ARE USING MIRAE MX240. ON THIS MACHINE, THE FEEDER ADVANCE AND THE FEEDER PITCH IS CONTROLLED BY THE MACHINE/SOFTWARE AS OPPOSED TO THE FEEDER ITSELF. OUR SELECTIONS FOR 24MM FDDERS ARE 4,8,12, 16, AND 24MM.I WAS WONDERING IF THE 20MM PITCH WAS UN
Electronics Forum | Tue Feb 15 11:55:55 EST 2005 | Rob
Of course Greg, silly me, you could have been referring that other C5, the infamously crap Sinclair C5 electric car from the 80's!
Electronics Forum | Tue Feb 15 18:48:10 EST 2005 | russ
Tell me more about the C5! I thought we were talking used Vettes here
Electronics Forum | Tue Feb 15 10:21:19 EST 2005 | gregp
Any tape--any pitch. On our C5 platform every part number (in your database) has a package type assigned to it. The package type contains the information about the pitch and component orientation. When you load the feeder you scan the part number-
Electronics Forum | Tue Mar 24 14:59:45 EDT 2020 | namcom18
I have a spare Mirae MPS20-TFUIII unit in working order on a scrap machine, does any one know what its worth as I have been offered $1180 for it is that a good price?
Electronics Forum | Sat Feb 02 04:48:30 EST 2019 | dfl
yes it's moving at the wrong pitch, about 3 components a time. Is the programming you talking about at the microcontroller AT85C55 or that serial memory 24C04? Or there is some procedure on the Quad to adjust this?
Electronics Forum | Sun Feb 03 07:41:29 EST 2019 | dfl
Anyway, after both procedures, the feeder still advancing more than 4mm (like 12mm or so)
.gif)
winsouce.jpg)