Electronics Forum | Tue Aug 24 10:58:26 EDT 1999 | James Graves
Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Conseq
Electronics Forum | Wed Sep 25 11:11:14 EDT 2002 | xrayhipp
Try .005 or even .004 thick laser cut electopolish stencil and reduce grain size of paste. Go with 400 or 25 in the case of AIM. We had a similar prob.
Electronics Forum | Wed Aug 25 21:51:13 EDT 1999 | Jason Tomlinson
| Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Cons
Electronics Forum | Wed Aug 25 19:44:35 EDT 1999 | Dave F
| Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Cons
Electronics Forum | Thu Aug 26 04:35:54 EDT 1999 | Wolfgang Busko
| | | Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products.
Electronics Forum | Wed Aug 25 17:09:53 EDT 1999 | Earl Moon
| | Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Co
Electronics Forum | Wed Aug 25 15:51:58 EDT 1999 | JohnW
| Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Cons
Electronics Forum | Thu Feb 24 10:52:41 EST 2000 | JAX
Robert, Here's my recommendation's: Solder paste opening on screen should equal the solder mask opening on board. Stencil thickness at .008" but this should not be your main concern as stencil thickness should be determined by the fine pitch that ar
Electronics Forum | Thu Feb 24 10:52:41 EST 2000 | JAX
Robert, Here's my recommendation's: Solder paste opening on screen should equal the solder mask opening on board. Stencil thickness at .008" but this should not be your main concern as stencil thickness should be determined by the fine pitch that ar
Electronics Forum | Thu Feb 24 11:05:53 EST 2000 | Russ
I usuallly like to have the pad size the same size as the ball up to +2mil, the pcb solder mask opening to be +4 mil from the pad size (I have found this to aid in Xray inspection for opens since you can see the little tail of the solder wicking up t
winsouce.jpg)
