Electronics Forum: multicore solders (Page 1 of 9)

multicore?

Electronics Forum | Wed Jan 03 05:21:01 EST 2001 | David T Truman

We currently use Multicore solder cream and I have recently been made aware of possible unrest in the Multicore/Loctite camp. Does anyone know what the future holds for Multicore and is it true that they may be pulling out

Re: MultiCore Brand

Electronics Forum | Thu Aug 10 14:02:07 EDT 2000 | vickij

Kyle, We use Multicore no clean solder paste. If you need some info, let me know. Thanks! Vicki

Solder paste Density

Electronics Forum | Wed Aug 13 22:23:24 EDT 2008 | davef

8.4 * SAC305 => 7.36 * Sn-3.5Ag => 7.5 * '....in' [96.2Sn-2.5Ag-0.8Cu-0.5Sb] => 7.39 * Sn-4Ag-0.5Cu => 7.39, 7.44 * Sn-3.8Ag-0.7Cu (Multicore solder) => 7.5

fine pitch printing

Electronics Forum | Wed May 17 13:48:37 EDT 2006 | dwelch123

I'm having trouble printing leads on a fine pitch part. The lead is only .008". I'm using a DEK 265 with metal squeegee and using WS200 multicore solder paste.The stencil is laser cut and polished. I've experimented with different pressures and diffe

Leaching

Electronics Forum | Mon Apr 28 16:36:11 EDT 2003 | razor

Component: Termination (barrier) NI, 120/3.0 um Solder Plate (outer) 90% Sn, 10% Pb, 120/3.0 um Solder: Multicore CR39, 95.5%Sn/3.8%Ag/.7%Cu @ 6mil Flex PCB: Cu, Ni, Au .2m to .5m Thanks

Versaflow dross buildup

Electronics Forum | Fri Jan 25 11:49:09 EST 2008 | toddl

Hi all, I have an inconsistent situation. Lately, we seem to have excessive dross buildup in the solder pot which inturn causes the pot to overflow. Has anyone had a similar experience? Here are the details: age of machine= 9 years, flux used= Kester

Flux Vision

Electronics Forum | Thu Dec 21 08:45:40 EST 2000 | Hussman

I've been asked to "heat up the oven profiles" to "burn off" the excessive flux so our vision equipment can inspect solder joints. 1. I am using Multicore SN 63 no clean solder paste. 2. We use CR Technology Vision Inspection. Before I get too

SOLDER BALLS

Electronics Forum | Tue Apr 28 21:48:50 EDT 2009 | davef

Confirm the source of the issue. Run a coalescence test on both lots of paste. A simple coalescence test can quickly determine the condition of solder paste after prolonged use. Simply print a small disk [around 4-5mm diameter and 0.2mm thick - a bu

Posted wave solder paper to library and my 2 cents on intermetallics

Electronics Forum | Sun Jun 20 16:45:48 EDT 1999 | Chrys Shea

I dug through my big box of office crap and found the disk with my technical papers. I posted the one on process control in the SMTNet library. It covers a lot of ground on what causes defects in the wave (too much or too little of something), and

Re: Posted wave solder paper to library and my 2 cents on intermetallics

Electronics Forum | Mon Jun 21 12:08:17 EDT 1999 | C.K.

| I dug through my big box of office crap and found the disk with my technical papers. I posted the one on process control in the SMTNet library. It covers a lot of ground on what causes defects in the wave (too much or too little of something), an

  1 2 3 4 5 6 7 8 9 Next

multicore solders searches for Companies, Equipment, Machines, Suppliers & Information