Electronics Forum: parametrics (Page 1 of 1)

alignment requirements for 0.5mm pitch

Electronics Forum | Tue May 07 08:18:12 EDT 2002 | Sir Alexandr

Almst quality of PCB with this pitch defined on used boards. Good board produses Fullmarks , look up to it , stencil parametrs isnt so critical but board material and layouts.

Universal Axial Model 6287A communication

Electronics Forum | Sat Mar 17 13:53:47 EDT 2018 | introlab

Hi . When you reload the exe file to machine you must configurate the system by type sys in terminal and define some parametrs

Adhesive Printing

Electronics Forum | Thu Mar 14 22:10:24 EST 2002 | alex_kirichenko

We always print adhesives.. And don't really have problems.. as long as your stencil is right and glue doesn't stay in appetures after first print. The parametrs same as for paste.. You can run it faster, but we don't have big enough runs to bother

Tape Splicing Joint Sensor for Panasonic Sensors

Electronics Forum | Mon Sep 16 18:45:26 EDT 2013 | mbb

Hello, We have currently Pick and place machine (Panasonic) with tape splicing joint sensor,the issue is, that once we want to change tape splicing for costs reason, the sensors don't detect any tape splicing .Is there anyone from Panasonic to expl

Solder mask

Electronics Forum | Mon Jan 12 01:20:07 EST 2009 | sachu_70

Hi Konrad, I would suggest you include a clear mention of your requirement towards mask color as a "Special Note" in PCB Gerber / PCB drawing, for ready reference by your PCB manufacturing during fabrication. However, slight changes in color shade co

Reflow soldering of Solar panels

Electronics Forum | Wed Apr 21 00:14:10 EDT 2004 | ramanandkini

We wish to use rectangular 4 segment solar panels in our quartz watches & charge the battery. The size of the soalr panel is 18.20mm X 7 mm and the thickness is 1.15mm. The other popular application of this type solar panels is in calculators. These

Samsung CP45FV Neo Programming

Electronics Forum | Fri Apr 11 11:41:31 EDT 2014 | superlen

JB, I have found the same thing with the visions codes & auto-teach. I'm sure there are some nifty tips/tricks to make all this work faster/better. I just wish they were documented in the manuals better. One thing I did on a yellow tant just a few d

Re: Who Are The X-Men?

Electronics Forum | Mon Oct 19 12:03:09 EDT 1998 | Scott Cook

Out of interest, are you using an 84V? 84VZ? a 60V? 60VZ? With SBIP or the Yamaha vision system (VICS 1000)? Do you have the old tray sequencer? > WRONG!!!! Why do folks still live in this mindset? I'm not slamming you personally. But this is preva

Re: Who Are The X-Men?

Electronics Forum | Wed Oct 21 21:27:32 EDT 1998 | smd

| | WRONG!!!! | Why do folks still live in this mindset? I'm not slamming you personally. But this is prevalent in our industry. | More opinion: | Make REWORK a nasty, dirty word. Work for the ROOT cause of a process problem. DO NOT ACCEPT rework a

NPI Qualification Checklist

Electronics Forum | Mon Apr 21 13:48:32 EDT 2003 | davef

ISO 9001-1994 and ISO 9001-2000 are significantly different regarding 'process'. In the 1994 version, processes were considered to be routine manufacturing processes [eg, drill a hole]. In the new ISO, a 'process' is more global and covers anything

  1  

parametrics searches for Companies, Equipment, Machines, Suppliers & Information

SMT spare parts - Qinyi Electronics

Reflow Soldering 101 Training Course
Win Source Online Electronic parts

Software for SMT placement & AOI - Free Download.
SMT feeders

Best Reflow Oven