Electronics Forum | Tue Oct 23 18:59:08 EDT 2007 | deltav
Were looking for the Hollis GBS Mark III ladder code for the GE Series One PLC or a CPU module from a GBS system we can download from or buy outright. We have lost the application code from RAM and need to restore or recreate it. Bob
Electronics Forum | Tue Feb 05 16:44:35 EST 2013 | rway
Just an FYI regarding the 8080 buffers: When you replace the lithium battery in the display module, replace the one in the PLC as well. Of course, you will need the machine turned on when replacing the batteries.
Electronics Forum | Wed Mar 18 11:39:06 EDT 2009 | chrisgriffin
Greg, You guys are right, it was a thermistor. I believe the machine was powered up with the wrong voltage. Here is what gets damaged if the transformer is tapped for 230 and you apply 480: 1. Both CPU modules on the MX100 PLC's blown. 2. Both col
Electronics Forum | Fri Nov 20 10:44:46 EST 2015 | cgreiner
Hello > > I got a SiPlace 80-S20 machine which had > a damaged hard drive in MC. I changed HDD and > re-installed RMOS + MC from floppies. Then I > turned on the machine (without any Line > Computer). > > The software on Station computer > wou
Electronics Forum | Fri Apr 20 10:17:47 EDT 2018 | sarcher
We purchased a ERSA Wave Solder 330-F machine recently "As Is", with NO warranty. Trying to get the machine started, we've ran into trouble with the Spray Fluxer ESF. During the initial verification run, the spray fluxer would move 4 times to the ce
| 1 |
winsouce.jpg)
