Electronics Forum | Wed Feb 03 15:57:18 EST 2010 | baildl632
We have a DEK 265 also. It may be the PNOZ (relays in a box) or the "in rush" capacitors "leaking" or "opening" causing your power supply symptoms. Went through something that sounds similar to your description of "power supply" problems. Your best o
Electronics Forum | Sat Feb 27 17:03:07 EST 2010 | deltaservices
Sorry I have never worked on the csm's you can get an old topaz for nearly nothing. Those are easy to calibrate. What could be an option is to place an X-row of chips under 0 degrees 4X then 90degr 4X then 180degr 4X then 270 degr 4X. Place them al
Electronics Forum | Mon Mar 09 17:42:56 EDT 2009 | smellew
ok Please power on the machine & confirmed that M1CP 2 is ok this is the breaker for the 35V & check M1cp1 now look at the drawings at address 1011 & check the axis ready relays Z1 11CS3x 151-GB Closed is ok if open see address 5402 Z1 servo amp is f
Electronics Forum | Tue Mar 10 14:11:42 EDT 2009 | rodrigo
Ok I checked and here are the results... Z1 11CS3x Green LED on Q1 11cs4x Green LED on Z2 12cs3x Green LED off (This is the relay I mentioned in my original post). Q2 12cs4x Green LED on M1CR4x Green LED off The servopack SA-6 is the one with the
Electronics Forum | Tue Jul 17 18:19:09 EDT 2001 | dave
CONNECTOR, 4 X 40, MALE, SM, 0.472 STANDOFF301-00030TOLC�Mount(1,27mm),.050",(0,64mm) .025",micro pitch Looking for someone who has had experience placing this Samtec style of connector .We are having issue with open solder and insufficent. We are no
Electronics Forum | Thu Jan 15 13:02:55 EST 2009 | bigdaddysoy9
This is the procedure to reset the password in the UCT-52 software. I don't know if it will also work on the machine, but it's worth a try: To reset UCT 52 after you get a password has changed error, you need to type the master password in to reset
Electronics Forum | Wed Jun 09 02:35:10 EDT 2004 | Bernard
Base on the PORON foam rubber recommended, is it possible to apply on small BGA chip of 4x4 ball size 0.3mm. Any specific part no and supplier for this type of foam and is it a anti-static material? Would it be possible to punch out at dia. 3mm?
Electronics Forum | Tue Apr 18 16:30:17 EDT 2006 | ratsalad
At my previous employer we ran HSP - GSM lines. Some sites used CIMBridge, others Unicam. We all used UCT52, not USOS, for the HSPs. At that time we had 4796's, 4791's, and USOS 4.X on our GSMs.
Electronics Forum | Mon Feb 04 12:28:28 EST 2008 | jseagle
1.0mm (0.039") 1.75X >0.5 to 1.0mm (0.02 to 0.039") 4X 0.25 to 0.5mm (0.00984 to 0.02") 10X
Electronics Forum | Thu Aug 23 15:44:17 EDT 2012 | bandjwet
Anyone have ideas on how to tin window=paned areas of a 4 x 40 gauge ribbon cable? The areas are 2-8 mm in length. Thanks! Bob
.gif)
