313 quad ivc import results

Electronics Forum: quad ivc import (Page 1 of 32)

quad ivc vision slug

Electronics Forum | Fri May 18 12:42:50 EDT 2018 | arachid

Hi, i search for drawing of calibration slug to calibrate a vu4/6 vision system on a quad 4c. on my manual it is name spindle runout calibration slug but not have part number. if you can give me this drawing i will very apreciate it. I need picture,

quad align init problem

Electronics Forum | Thu May 20 09:47:25 EDT 2010 | pforister

Is this a single head Quad IVc or a dual headed line? if it is a dual line you can swap the align cards in the front bay between the two heads and see if the symptom follows. The card on the far right is a transport card, shouldn't need to swap tha

quad IVc continue

Electronics Forum | Mon Mar 28 10:26:55 EDT 2011 | miroyu

Hello everyone . I received lot of help from people of this forum for which I want to say "thank you" guys. I had problem whit initialization of my Quad 4C which just sits for 2 years after purchase. I manage to locate problem with laser diode on pla

quad 1000 error

Electronics Forum | Mon Jun 13 19:07:57 EDT 2005 | bobpan

Mike, Right down all the settings you have for your machine (this may take a while). Also back up the programs you want to save. Now....if i can remember correctly.....when looking into the black computer box from the back of the machine...in your bo

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad

We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve

Check out a new Q

Electronics Forum | Wed Nov 11 06:59:20 EST 1998 | Jim Mitchell

Scott - Good to see things are going well for you. With regard to your comments, Quad has introduced a complete line of Semi-conductor/APT machines (Q Series) that support both SMT and Semi-conductor applications. The machines were introduced in 19

Quad IVc Laser Align Extents

Electronics Forum | Mon May 16 15:50:52 EDT 2011 | jimlas53

Yes, it looks like it would involve quite a bit... I guess it partly depends on finding the hardware/firmware, possibly from a donor machine. But it might not be worth the cost. At the moment I'm running all product on the first machine with Quada

Quad IVc AutoProgram

Electronics Forum | Thu Apr 18 05:23:38 EDT 2013 | bobpan

To use 2 heads in autoprogram.....each one should be defined in the assembler system. You have to use the option to breakup programs for seperate central controllers if indeed they both have their own computer. The most important thing is each assemb