Electronics Forum | Sat Apr 21 15:03:23 EDT 2012 | lakritzstange
Hi all, we have a Mirtec table top system MV-7. We are trying to use the ocr function to "read" the letters on the IC/resistors and so on. But the results are really bad. From other company using other machine i know that ocr is working fine. Ha
Electronics Forum | Wed Aug 15 16:06:55 EDT 2001 | davef
Coo What do you mean ehen you say "kept our BGA's under the magic 150 deg mark"?
Electronics Forum | Mon Apr 23 22:27:14 EDT 2012 | padawanlinuxero
I have a MV-2HTL and we don't have problems with it. Have you try to contact Mirtec ? probably is a problem with the camera.
Electronics Forum | Wed Apr 25 19:19:42 EDT 2012 | padawanlinuxero
Hi is me again If what you are looking is for the AOI to "see" the marking on a resistor theres the option of taking a picture of only the numbers in the resistor is not highly accurate but it works.
Electronics Forum | Thu Aug 16 10:49:35 EDT 2001 | JohnW
Dave, we try and keep the temperture that a BGA is exposed to at wave solder below 150 deg C. At this temperature it's unlikely that you'll get near to starting secondary reflow of the device or that you'll grow any significant amount of intermetall
Electronics Forum | Tue Apr 24 09:30:43 EDT 2012 | bdamico
Hello Laritzstange, My name is Brian D'Amico, I am the president of MIRTEC USA. I noticed your posting on this forum and I would like to offer some guidance. First, I would like to ask which system you have. Our MV-7 system is an in-line system.
Electronics Forum | Wed Aug 15 06:16:30 EDT 2001 | JohnW
Ok so an update on the ceramic board. I've had some success but did have to cheet a little. So Dave, on the fluxing, your right we're not getting it all the way up the barrel and in the end as a short term fix we're dipping the lead's in flux not th
Electronics Forum | Fri Mar 25 15:14:09 EDT 2011 | ghenning
Create an ODBC connection to the Firebird DB. Then query the RESULT_HEADER table with something like: SELECT RESULT_HEADER.MACHINE_NAME, RESULT_HEADER.MODEL_NAME FROM RESULT_HEADER GROUP BY RESULT_HEADER.MACHINE_NAME, RESULT_HEADER.MODEL_NAME ORDER
Electronics Forum | Tue Jan 16 15:02:25 EST 2001 | bdoyle
results are working for me. hm....I'll try in netscape. Relevancy actually scores based on the amount of times a certain searched term appears in the result and also where in the result it appears.
Electronics Forum | Wed Oct 27 07:34:14 EDT 2021 | reinhardk
Hi, we have a DAGE Assure machine, and we are happy with the results it gives us. Even without proper teaching the results were good (for common part sizes). *With* proper teaching results are even better. Only in certain cases results are unusabl
