Electronics Forum | Fri Apr 30 15:11:53 EDT 2004 | pjc
MPM has a new board support system called GelFlex. It can be used on UltraPrint 2000 machines as well as AP series, UP1500 and AccuFlex models. For more info, go to http://www.speedlinetech.com/mpm/gel-flex.aspx also, contact Chris Wild at Speedline
Electronics Forum | Tue Mar 06 06:58:29 EST 2018 | griinder
Thank you guys for your help and detailed explanations. I have successfully been able to teach pads as fids. The camera view is very annoying, but manageable. Especially when teaching inspection positions. On the momentum's we can use Gerber EZ Teac
Electronics Forum | Thu Jul 07 11:52:25 EDT 2016 | proceng1
We just pulled a Speedline Accuflex printer out of storage. After programming a board and stencil, and calibrating the fiducials and everything, we do a test alignment and bring the board to print height. It is off. I've done it now with two diffe
Electronics Forum | Tue Jan 13 19:16:03 EST 2004 | pjc
Dedicated tooling uses what MPM calls an "H" tower. You mount the board support plate (dedicated tooling) on top of the H tower. If boards are only single-sided SMT, meaning only components on one side, the board support plate is flat with vacuum hol
Electronics Forum | Tue Sep 24 15:32:22 EDT 2019 | kurtiss
During production our MPM Accuflex stopped working. When going into "Play" mode to run production it almost instantly Pauses. When going into vision setup it fails to load the PCB saying "The PCB Did Not Load". Ignoring this error and trying to read
Electronics Forum | Fri Oct 03 08:42:36 EDT 2003 | m4040
This is probably the most advanced machine that MPM has EVER offered. It operates in a Windows 2000 environment, which means plug and play networking. Both setup for new boards and 2D are VERY easy to set up. Most new board programming can be done of
Electronics Forum | Sat Jun 01 11:15:34 EDT 2013 | aemery
Delete the program and start over. I can't get a clear understanding the way you described the error, but it does sound like you have some kind of detent issue or a board stop programming issue. Depending on the configuration of your machine and th
| 1 |
