Electronics Forum | Thu Apr 11 19:12:11 EDT 2002 | djarvis
Sorry fellas -disagree. We only clean our stencils in the ultrasonic machine at the end of the run. If the same pcb is up the next day we clean them by hand. We use Electrolube SSS and the used rolls from the in line under stencil cleaner. Wipe the
Electronics Forum | Wed Mar 27 16:54:47 EST 2002 | davef
STARTING RANGES * Pressure � 1 pound/inch of blade (metal); 1.6-3 pound/inch (plastic) * Speed - 0.5 to 3 inch per sec [for standard pitch]; 0.5 to 1 inch per sec [for fine pitch] Your paste supplier�s recommendation is a good place to start. * Sepa
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c
Electronics Forum | Thu Sep 08 13:14:11 EDT 2016 | claudea2
Hello, we have an Ekra E4 that we bought used and the stencil wipe never worked. We found that the air tubing for the up (black)& down (blue) of the wipe roll is missing. There are 2 push connectors for up and 2 for down to receive the tubes. Does an
Electronics Forum | Fri Apr 15 11:14:13 EDT 2011 | smtmax
Hi. I've been looking for SMT machines and have > a budget close to 100k total on a stencil > printer, p&p + feeders and reflow owen. Witch > machines would you choose with this budget? Have > any one of you heard of evest? _a class=roll > href
Electronics Forum | Sun Dec 08 23:40:19 EST 2002 | nonotalent
Hi all, We are currently having problems with > a laser-cut stencil that is electropolished and > nickel plated with 9-mil openings. The paste > does not release well from the apertures. We are > having to wipe after every print. The board is >
Electronics Forum | Mon Oct 23 12:58:28 EDT 2006 | grizzy
"Surface Mount Techniques has approximately 98 > percent of the world market share of large Panel > Stencil Printers". > > It sounds a little bit > strange to me, especially since I work for one of > the companys listed in their advertisement an
Electronics Forum | Fri Jun 03 06:32:45 EDT 2005 | dougs
Thats a crazy price for a stencil roll. We are paying 5GBP per roll. About 8 euros. www.dtsprocess.com
Electronics Forum | Fri Jun 03 09:57:29 EDT 2005 | PWH
Might also try "Count on Tools": http://www.cotinc.com
Electronics Forum | Thu Jun 02 19:42:24 EDT 2005 | garymizuno
I'm still buying my solder printer cleaning rolls from my manufacturer. Does anyone know of any after market brand that is as good in quality and atleast half the price. I am paying $80.00 a roll. Gary
