Electronics Forum | Wed Jun 03 22:07:41 EDT 2009 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
Electronics Forum | Mon Jan 23 22:53:31 EST 2012 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
Electronics Forum | Thu Mar 01 16:39:29 EST 2012 | triadelectronics
Our company is going to attempt to place 0201 components using our Fuji CP4-3 with the upgraded SMD3 vision system. Count On Tools is providing the 0.4 mm nozzles and we are using our 8mmX2mm feeders with the 0.7mm tape leaf (if it works at all we w
Electronics Forum | Mon Apr 16 13:31:36 EDT 2012 | jdengler
Have you tried to restart F4G and/or MCS/30 after flushing the CP4 memory? I have occasionally ran into the comm error after a reset start. Leave the machine on and restart F4G or the MCS/30 whichever normally is hooked up. If it still won't commu
Electronics Forum | Mon Jan 21 08:49:43 EST 2013 | cnotebaert
Sorry to keep brining up such old topic! I’m looking for some help. I have a CP4-3 that I’m getting up and running. It was last interfaced with Flexa software, however I’m looking at connecting an F4G or MCS30 to it. Does anyone know if it was upgrad
Electronics Forum | Thu Jul 06 08:16:53 EDT 2017 | claudea2
Hello, I have 3 Quad 4C one with Quad Align and 2 with the older lasers. All 3 machines have a placement offset issue. Every 4 or 5 boards one of the machines has a placement offset of about 10-20mills in one direction. A reset usually brings it back
Electronics Forum | Wed Jul 05 10:11:39 EDT 2000 | lucky
Hi Fujicam 2.0 has not been released, and probally will not be released until the 4 quarter. Fujicam and F4G have a standard of 117 generic PD's in their library, not 2500.
Electronics Forum | Mon Jun 05 14:59:36 EDT 2000 | Mike Naddra
Does anyone have any expierence placing BGA's or Micro BGA'a with a Quad 4C, Any information will be helpful. Mike
Electronics Forum | Thu Mar 30 11:10:43 EST 2000 | Gary Kemp
Is the same marking protocol used when identifying 0603, 0402, etc.. components? For instance, would a 27.4K ohm 1% resistor still have four (4) characters to identify if the body color is black? Any feedback is appreciated. Thanks.