Electronics Forum | Wed Sep 27 17:06:26 EDT 2006 | daxman
Hey Guys, I checked the histogram...it doesn't look good. I'm assuming the graph for the black bars has to be in the green on the left and the graph for the white card needs to be in the green on the right?? Anyways, I can't find a "GS4 pot" I looke
Electronics Forum | Fri Sep 22 15:35:14 EDT 2006 | lheiss
Hello all, Finally ready to run my first 14 up array and the machine picks up the part moves to the placement location, them moves to home and drops the part. The Z axis never moves. I do get a "run error 1" at about the 4th placement (if it was a
Electronics Forum | Tue Nov 21 20:21:11 EST 2006 | billwestiet
Most machines for lead free have adjustable conveyor angles (4 to 8 degrees). In the good ole days with lead, we typically ran at about 6 degrees. Often we see closer to 4 degrees with lead free. This is very common, and provides longer immersion
Electronics Forum | Wed Aug 22 14:25:22 EDT 2007 | russ
Go inform the owner of your company that you are spending hours of labor dealing with these parts instead of spending the extra 4 dollars it takes to buy an entire reel. When we deal with strips we make sure that an extra amount is ordered to apply
Electronics Forum | Sat Feb 10 20:08:25 EST 2007 | colormaker
I just started a design where I will be placeing smt parts on both side of PCB. 50 parts on top side ranging from 0602 to SOIC8 and 4 SOIC LED's on bottom. How can I assemble with parts on both sides ? I have P&P,stensil printer, relfow and solder w
Electronics Forum | Sat Feb 17 13:15:09 EST 2007 | gregcr
Hi All, We have a handfull of GSM's here and some are newer than others. I was wondering what the options are as far as upgrades to the VME chasis. We have our oldest running with EPC-4, EPC-5, EPC5A and so on.... Can newer EPC units be used in t
Electronics Forum | Fri Jun 22 01:51:41 EDT 2007 | jmelson
&F(27).NO4=0 NO4 is for the prep head, which you probably don't have. So, it is zero to mean don't use the prep head. &F(27).DSPF=1 This is the "display flag", it apparently means this component slot in the file contains valid data for a real compon
Electronics Forum | Tue Dec 18 08:08:09 EST 2007 | itwasbill
Hi all, How can I convince my equipment purchasing supervisors that to properly solder BGA's a 7 zone oven would be far superior than a four zone? We currently own a 4 zone oven and I'm fearful that the BGA will not get adequate heat for solder
Electronics Forum | Fri Feb 01 08:40:12 EST 2008 | jdengler
Hi AJ, Change ALL 12 of the 1.0mm to 0.7mm. The CP 4 can only set nozzle size for S M and L not some of the 12 but all 12. 0402 usually come in 8 x 2 mm tape so you need 8 x 2 feeders or you will waste 1 component for every component you use. T
Electronics Forum | Fri Apr 11 06:22:04 EDT 2008 | andrzej
Hi Andrzej, > > We are using for BGA (0.8 pitch) > square apertures size 0.4 mm (rounded corners r = > t) and stencil thickness t=5 mils. So area > ration-_ w/4t=0.8 > > Regards Jan Hello Jan, I understand that you have the same pad dimensio