Electronics Forum | Sun Jul 14 16:46:38 EDT 2019 | rob1
I'm working on A DEK 265 Horizon and I need to convert it to right to left. I have changed the conveyor direction in software, however, the board stop position appears to be from 0 to 255 and I need it stop on the left hand side of the centre referen
Electronics Forum | Wed Jul 17 12:00:27 EDT 2019 | weglimir
Hello, Dek printer is starting successfully until "press System switch to initialize printer" but nothing happens when I press the button. What could be the reason? I've tried another pait of monitors with different system button, and it doesn't ch
Electronics Forum | Wed Jul 24 15:33:49 EDT 2019 | weglimir
Hello, We've got this DEK256GSX quite some time ago, and finally we've managed to start and initialize it. However the problem is that we don't know edit password, and re-seller that we initially bought this unit from doesn't know the password as w
Electronics Forum | Sun Aug 04 04:30:13 EDT 2019 | alexeyzb
Hello! I used three from your list: ESE, DEK and SpeedPrint. From my point of view ESE is the best choice (ESE - good and not so expencive, DEK - very good and expencive, SpeedPrint - average). 2D is slow option and need to compare with efficiency ot
Electronics Forum | Wed Sep 04 12:02:03 EDT 2019 | spinn
Hi all, Just to add further information to this post. We have 10 inch (250mm)and 19 inch (480mm) Dek 248 complete printer squeegee clamps with blades. On the 250mm one blade has a very slight kink though shouldnt cause a problem. Offers welcome
Electronics Forum | Sat Nov 23 06:05:31 EST 2019 | hemantpang23
Hello Everybody, I have a problem with a DEK 265GSX, I get this error message: Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE I have found that this might be due to a broken wire and I have checked all
Electronics Forum | Fri Jan 17 09:34:22 EST 2020 | emeto
It looks like you have a simple version of the Horizon. You should have a scale on the right side with a stopper. When you create a new program you will define where the stopper should be. I used to same this value in the program description field, s
Electronics Forum | Mon Jan 20 17:26:07 EST 2020 | sumote
I see what the issue is now. A previous owner has removed the slider from the machine. I can see where it was mounted (bare metal where it was originally mounted as opposed to the black paint/powder coat). Is this slider available to purchase to re
Electronics Forum | Thu Jan 30 07:29:15 EST 2020 | richardcargill
Finishing off tidying up/ cleaning a DEK 265 mk1 and inside ( front/centre ) are 4 silver pots and a pressure gauge. All the labelling is unreadable. I know the gauge is sort solvent dispensing, but no idea on what the pots adjust. Can anyone shed a
Electronics Forum | Thu Mar 19 15:28:34 EDT 2020 | emeto
You are programing something wrong or your image is not in the center of the stencil. On DEK machines you can move a lot in Y by offseting the image in the program. In X machine can move +_5mm. Now, sometimes there is a way around this as well if yo
