Electronics Forum | Wed Feb 05 10:26:18 EST 2003 | russ
Go one to one at 7mils for these connectors. Generally your stencil shop will do this for you. Somebody has the artwork since a stencil was made for it at sometime? Russ
Electronics Forum | Sun Jun 02 18:31:58 EDT 2002 | Gregory Hickory
Hi Folks, Well, what I want to see is below: China is good in imitating products. They imitate but they sacrifice the quality. When can I see a Pick-and-place machine that is MADE IN CHINA? With most manufacturers shifting to China....that dream wo
Electronics Forum | Wed May 29 22:22:28 EDT 2002 | davef
I don't think thay offer that specific alloy, but if you check with Kester, Alpha, and Indium; they might be able to suggest a supplier or an alternate product thaat is quite similar.
Electronics Forum | Wed May 29 22:02:16 EDT 2002 | davef
Russ is spot on!!! [Although, he maybe talking uin rather than micron.] Search the fine SMTnet Archives for more.
Electronics Forum | Fri Jun 14 02:53:15 EDT 2002 | myfloh
It is a FUJI Line with the machines: GP641 GL641 CP6 IP3 the oven is the smt Quatro peak. Moreover we have an AOI.
Electronics Forum | Fri Jun 14 02:13:11 EDT 2002 | john_wsme
Ross, Thanks for your advice. I will take a look at FAB warp and check the pad size. If you also have any suggestions on rework BGA profile, please share some information which is a great help for us. The best regards, John Need help from everybod
Electronics Forum | Mon Jul 01 16:32:02 EDT 2002 | lysik
The software version is actually 1.4.7 I want to be able to use the feeders with the blue buttons. I bought the machine second hand.
Electronics Forum | Tue Jul 02 07:11:31 EDT 2002 | davef
There is nothing inherently wrong with voids in solder connections. They: * Do indicate that the reflow soldering process is not well controlled. * Can comprise the strength of the solder connection. Look here: http://www.smtinfocus.com/smt_failure
Electronics Forum | Tue Jul 16 01:02:59 EDT 2002 | ppcbs
Can anyone suggest vendors that supply BGA to PGA adapters to adapt a BGA so that it can be installed on a throug-hole board? (http://www.smtnet.com/Forums/Index.cfm?CFApp
Electronics Forum | Wed Jul 17 02:32:13 EDT 2002 | computer
Hi, Anybody with a solution on solder balls on gold pad. I have tried the following a) Check cleanliness of solder paste printing area b) Clean stencils on 1 clean per 2 prints c) Use N2 on the reflow oven. Any other methods...