Electronics Forum | Thu Feb 05 23:07:08 EST 2015 | ermani9
Hi.. Spoiltforchoice.. Thanks for your comments. Yes this system uses a parallel port Protect key and drivers for the same are already installed and that generates a "Hinstd.dll", and it is there in the syatem32 folder. but my software installation
Electronics Forum | Tue Feb 03 22:38:22 EST 2015 | slouis2014
Hi guys. I need to update the existing DFX guideline (PCBA) of our company, the last revision was 2009. Their's a lot to update for the latest technology nowadays. any document recommendation is very welcome.
Electronics Forum | Thu Feb 05 14:30:29 EST 2015 | chsravan
Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?
Electronics Forum | Fri Feb 06 18:32:59 EST 2015 | chsravan
Hi Scott,Thank you for the response. I was also thinking the same that the assembly will no longer be Class III. Thanks again.
Electronics Forum | Mon Feb 09 08:34:50 EST 2015 | saoasasd
In my case most of the PCBs are OSP finishing and worst case of MSD component on bottom side is level 3 (168 hours). You mean that PCB shelf life with bottom side assembled shoud be 84 hours?
Electronics Forum | Mon Feb 09 10:51:10 EST 2015 | jax
If solderability is the only concern, then there is no standard time. Multiple factors involving OSP thickness, Flux activation levels, profile parameters, storage environment will drive the problem. You just need to perform tests to determine your m
Electronics Forum | Tue Feb 10 17:38:22 EST 2015 | mbartel
low volume high mix, looking for advice on what i should get, a stencil machine or a jet printer for smt solder paste. used/new and companies i should look into?
Electronics Forum | Wed Feb 11 14:10:55 EST 2015 | mbartel
Any one screen printer manufacture stand out over others? We are also 100% lead free, I use Kester solder paste. Is this a good brand compared to other brands?
Electronics Forum | Thu Feb 12 14:43:25 EST 2015 | emeto
Just my opinion: Stencil printers: 1. DEK 2. MPM 3. ..... Solder paste: 1. AIM 2. Alpha 3. Indium .....Kester
Electronics Forum | Mon Feb 16 10:27:53 EST 2015 | dinhhuunam
Hi Sir, I would like advice for you SJ INNOTECH Screen printer Please reffer website : http://sjinnotech.com/ht_ml/main/ Many thanks for your information