Electronics Forum | Tue Jul 03 11:19:15 EDT 2012 | padawanlinuxero
Hello I have 2 Mirtec MV-7 AOI's and we have never had any problems with the inspection on these machines, in the hardware they are tough, one has been running more that 6 years only with the preventive maintenance and some wearable parts.
Electronics Forum | Tue Jun 19 20:03:16 EDT 2012 | smtventasmex
Hi i have an Accuflex and i enter ones with a pasword to windows, then we writte it down on the equipment and we paint it so we lose the pasword any idea hoy to enter to windows?
Electronics Forum | Mon Jul 02 03:55:07 EDT 2012 | mccabekev
We are having a problem with inspection markings on our boards running when conformal coating is applied We have tried standard permanant markers, and also paint markers, but both run when the coating is applied. There must be someone out there who
Electronics Forum | Tue Jul 10 03:31:14 EDT 2012 | buckcho
Hello, the best way is to set the oven to cooldown. Opening the oven is not very good idea, but is not a big issue I think, only bad air in the production. Try if you can to make production from glue to Pb free if it is possible.
Electronics Forum | Tue Jul 10 18:47:03 EDT 2012 | gaz
We are having an issue where when we are wav soldering, there seems to be a lot of smell. We have exhaust fans running, but not sure how to know if they are enough. Do you know what area of the machine/process is most likely the cause of the smell a
Electronics Forum | Tue Aug 28 11:03:40 EDT 2012 | mikesewell
The problem is still intermittent. It has a new MIDAS head, installed and calibrated by Mydata, FWIW. Usually we work around it by moving parts upstream (Fuji AIM). I'll post an update when I finally chase the issue down.
Electronics Forum | Fri Aug 03 06:20:58 EDT 2012 | kahrpr
Absolutely! The Solder paste needs to be brought to room temperature or close before opening. It like bringing a cold glass from the refrigerator when the humidity is high,water will condensate on the glass. It also will condensate on the solder and
Electronics Forum | Fri Aug 03 15:45:51 EDT 2012 | davef
I agree with Ka. I can't think of a solder paste supplier that doesn't tell you to let your paste come to room temperature before putting the paste on the stencil.
Electronics Forum | Fri Aug 03 16:48:14 EDT 2012 | davef
Bob Willis posted a PIH Reflow book [for your dining & dancing enjoyment] http://pihrtechnology.com/?goback=.gde_143002_member_106193230
Electronics Forum | Thu Aug 09 01:05:03 EDT 2012 | sajith09
I would like to understand What will be the allowable warpage for 152mm length PCB. We are observing about 1.5mm warpage. Is that acceptable? Could you please share method to calculate the warpage