Electronics Forum | Thu May 14 08:17:00 EDT 2015 | emeto
I am pretty sure that will vary on the paste manufacturer. Using different amount and composition of flux will give you some different viscosity. I evaluated different solder paste brands before and I can tell you that some of them are very runny com
Electronics Forum | Fri May 15 08:18:17 EDT 2015 | emeto
We all agree that you need to have your machine fixed. It probably needs calibration. Using Lead paste will help the parts to self align in the oven - however your misplacement should cover at least 50% of your pad. Pb free paste will not self align
Electronics Forum | Wed Jun 17 07:08:58 EDT 2015 | armandogomez
Hello PAWEL before you go and buy a machine that cleans you pcb, have you check the current conditions where the pcbs are storage? hair, speck of dirt, fiber and other things sounds to me that the area where you work with these pcbs is not very clea
Electronics Forum | Fri Jun 05 00:08:32 EDT 2015 | acepa
Hi, I need a recommendation for a manufacturer on a reasonable cost conformal coating (silicone or other). This is a US domestic appliance PCB 9 volts only that must be dipped. Silicone or other could be unused. There is a standard RJ45 socket I wher
Electronics Forum | Fri Jun 12 08:37:21 EDT 2015 | cgreiner
Check to insure that cut outs in the PCB is not triggering the board sensor on the input of the unit. We had a few boards where the cutout in the board was seen as the end of the board and it would stop several inches from the board stop. We ended
Electronics Forum | Fri Jul 24 17:08:04 EDT 2015 | cnotebaert
little behind are we? look in the archives from 2002-2005 when ROHS was implemented. however no real requirement here, ask your customer what they are after, most simply want a c of c stating its ROHS compliant, if your are talking REACH, that's a en
Electronics Forum | Wed Aug 05 12:13:50 EDT 2015 | swiese242
Find someone that has a 3D Printer and create a top and bottom jig that will hold them down. This has worked for our production needs in many ways and has saved us thousands instead having a metal shop create one. www.avcomsmt.com
Electronics Forum | Tue Jul 14 14:08:27 EDT 2015 | ldmservice
I am able to help you with Panasonic MV although some parts are had to come by. I also have experience with MPM. Let me know what you need and we can work out details.
Electronics Forum | Wed Aug 05 12:24:32 EDT 2015 | swiese242
I would like to encourage Tom's suggestion of using Alex. We know him well and does amazing work. Have been using him for our CP-743's and IP3's when needed. Recommended.
Electronics Forum | Wed Jul 08 10:29:14 EDT 2015 | goodting
Dear SMT Specialists Had anyone encountered GSM ADvantis zeroing failure problem? The x-axis is idle while the y-axis is waiting to be activated. My initial guess is either Axis control board or machine configuration conflicts. How to fix it? any le