Electronics Forum | Sun Aug 07 14:37:50 EDT 2011 | franxsmt
Hi every body, Recently I got a vibration feeder for my SM421 Samsung machine. The feeder has no manual and I don't have any contact with Samsung people. I put the feeder into a feeder slot, the feeder goes on (a red lamp on the feeder indicates it
Electronics Forum | Thu Aug 11 07:01:34 EDT 2011 | franxsmt
Thank you very much for your informative and helpful reply. I have a few more questions:) 1- So for the case 1: should I apply the glue to the PCB with the same method as I apply solder paste? (with screen printer and squeegee). If so, I would guess
Electronics Forum | Mon Aug 15 10:06:38 EDT 2011 | terrytaaffe
Hi All, > > We are thinking about adding a SPEA > 4040 flying probe tester to our facility to add > some flexability to our test capabilities. Does > anyone have experience they could share on these > units? I would be most interested in progr
Electronics Forum | Thu Aug 18 14:13:36 EDT 2011 | davef
Here are a few labs that would be good starting points: * Robisan Laboratory; 6502 East 21 St, Indianapolis, IN 46219; 317-353-6249 F357-1270 Susan Mansilla, Technical Director robisan1@aol.com * Trace Laboratories - East; 5 North Park Dr, Hunt Vall
Electronics Forum | Wed Aug 31 12:00:59 EDT 2011 | cpitarys
Vapor phase or vapor degreasing cleaning for electronics is simple technology that holds merit on process situations like you described. Easy and quick to set up and process with today's modern equipment you can be up and running in no time once the
Electronics Forum | Tue Aug 23 16:48:29 EDT 2011 | jax
assuming Sn05Pb93.5Ag1.5 Without knowing what you are trying to solder, PTH or SMT, the time might not be that far off. Does that time include stripping, cleaning, plating the leads prior to soldering onto the board?... pre-tinning the board as well
Electronics Forum | Mon Aug 29 17:59:24 EDT 2011 | garryc
My first printer was a Speed Print machine back in 2001. We still have it as a backup. I needed a printer quickly so I bought an EKRA from a show. We were very disappointed with that machine. The service was terrible. Parts were impossible to get. I
Electronics Forum | Fri Aug 26 10:37:24 EDT 2011 | ndion
I'm looking for some guidance here and would appreciate input from some seasoned professionals. I am the Op. Mgr. for a medium sized electronics contract manufacture, but my background is almost exclusively in the machine tool industry and I would li
Electronics Forum | Thu Sep 08 12:50:39 EDT 2011 | deanm
We use both the black conductive and blue static dissipative ESD totes in the production of Class 3 military electronic assemblies. In some cases we use ESD bags, but most board assemblies are placed directly in an ESD tote with a lid. The totes cont
Electronics Forum | Thu Sep 22 18:47:08 EDT 2011 | rodrigo
Hi all, We just got this machine and it is not fully functional. I read somewhere here that the folder mint has some useful stuff. I run mint and it said that it cannot communicate with card 0,1,2,3 (x1,x2,x3,x4). It said to make sure the cards are
