Electronics Forum | Sat Mar 29 08:04:38 EST 2003 | davef
Fastek Naw, Dreamy aint no Californie. "Do you come from a land down under? Where women glow and men plunder? Can't you hear, can't you hear the thunder? You better run, you better take cover."
Electronics Forum | Thu Apr 03 18:10:08 EST 2003 | Print Master
0402 Adhesive printing is possible with thicker stencils in order to allow mixed component technology. We have successfully printed 0402's with a 0.008" thick SS foil. Total material release is not achievable at this thickness, but not required u
Electronics Forum | Mon Apr 07 21:08:52 EDT 2003 | Satbir
Is this safe to wavesolder the PCB in wave contaning carbon pads for switch or somekind of masking is to be put on that pads.
Electronics Forum | Tue Apr 08 04:52:35 EDT 2003 | Benny
I am looking for a good VHDL forum . it would be happy to see some of VHDL forums....
Electronics Forum | Tue Apr 08 12:38:12 EDT 2003 | Denise
I'm looking for comparison data on MTBF for solder joints meeting IPC Class II vs Class III.
Electronics Forum | Tue Apr 08 14:33:11 EDT 2003 | ksfacinelli
I am tuning a BGA process for a board assembly and would like to know if someone with a depth of experience can look at some Ersa Scope picture I can email out. Thanks in advance, Keivn
Electronics Forum | Tue Apr 08 20:12:00 EDT 2003 | davef
Look here: http://www.e-insite.net/epp/index.asp?layout=article&articleid=CA73492
Electronics Forum | Thu Apr 10 12:49:08 EDT 2003 | Giuliano
I am using the old Tango for DOS to create an board with a 1mm BGA chip. How to define clearance around the surface pads?
Electronics Forum | Tue Apr 27 00:18:08 EDT 2004 | Garian
Since you have used malcom softener, did you encounter and sudden rise of void level in the solder joints as compared to manual stirring?
Electronics Forum | Wed Apr 16 08:15:55 EDT 2003 | davef
Check with your temperature profile equipment supplier [eg, KIC, ECD, etc]. We use a download from ECD that lists most ovens and solder pastes that make it [or one like from another supplier] a good place to start.
