Electronics Forum | Tue Nov 14 09:43:10 EST 2000 | jason
Hi, I have a question about charging up batteries. I have two batteries in series, they are NiMH PCB mounted rechargable batteries that are used for battery backups etc. I want to be able to recharge these batteries, so I wont have to buy new ones
Electronics Forum | Tue Nov 07 10:09:51 EST 2000 | Kevin
John, Depends on what you're cleaning (paste, adhesive, ink, etc..) and your process (do operators just dump a dirty stencil in and expect a clean one out, drying time, effect on the polyester). I could suggest a couple of name brand cleaners, but I
Electronics Forum | Mon Oct 30 13:26:09 EST 2000 | stefano bolleri
Ramon, I have placed BGAs before with an IP-2. It can be done, but with limitations: IP-2 can only see shape of BGAs, not balls (back-light only). Is this OK for you? I only placed components with balls having 50mil pitch, and the centering with bod
Electronics Forum | Wed Oct 25 10:11:09 EDT 2000 | Wolfgang Busko
Paddesign, aperture size and stencil thickness determine the amount of solder for your joint. Once you have found suitable parameters you need to control the volume of your paste deposit which is influenced by printer settings, paste condition, stenc
Electronics Forum | Mon Oct 09 17:49:29 EDT 2000 | sean
Hello John, The biggest stumbling block is going to be taking these responses and applying them to your assembly process much the same as trying to make other manufacturers' defect levels apply to your process. Ultimately, the overall quality of yo
Electronics Forum | Tue Oct 03 20:35:23 EDT 2000 | Dave F
1. Throughput * Dispenser: Slower, may loose 70% of tact on fast chip shooters * Printer: Can be put in front of and use fast chip shooters effectively 2. Rework Rate ???? Deposition control???? * Dispenser - High control over amount paste - Coplan
Electronics Forum | Fri Sep 29 13:51:46 EDT 2000 | C. Ortner
We work in a "low" volume high reliability house building mixed tech double sided multi layer CCA's for long lived space applications. Our present problem is inspection questioning every dimple/anomaly on every leadless part(we put passives only thr
Electronics Forum | Wed Sep 27 08:50:51 EDT 2000 | Dreamsniper
Hi Guys, I've compared stencil printing adhesive versus acquiring a dispensing equipment. Had breakdown all the costs against each other. It end up that Stencil Printing Adhesive is more costly than equipment dispensing machine in the long term (5 y
Electronics Forum | Wed Sep 20 19:34:13 EDT 2000 | Dave F
Congrats. You now control the source of almost 70% of the defects of your SMT operation. There is a neat series of presentations on printing, each year at SMI. One of the best of the SMI series was in 1997, because presenters used a common board
Electronics Forum | Sat Sep 23 15:13:40 EDT 2000 | Francois Racine
Hi Sophia, I`m responsible of SMT line and we solved this problem with a complete automatic solder paste printer machine. In the past we had problem with off alignment and solder height too.... at that time we used a semi-auto printer machine and w