Electronics Forum: x-outs (Page 1 of 5)

X outs

Electronics Forum | Thu Jul 25 21:41:03 EDT 2002 | davef

1.0 X-OUT POLICY 1.1 Each Panel not to contain in excess of X% X'd-Out boards. 1.2 Each X-Out board to be marked in a manner so that Pick & Place equipment will not attempt to insert those boards X'd-Out such as fiducial reference hole for paneliz

X-Outs and Panel Arrays

Electronics Forum | Wed May 14 11:10:56 EDT 2008 | scottefiske

Anyone out there in SMT land know the premium you will pay by not accepting any X outs?

X-Out Board

Electronics Forum | Fri Feb 17 11:48:25 EST 2012 | davef

Here's a link to an earlier thread on SMTnet that may add something to the conversation http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=20871 Allowing fabricators to X-Out boards is a bad idea. * X-Outs are randomly placed * Machines can

X outs

Electronics Forum | Thu Jul 25 15:00:37 EDT 2002 | Claude_Couture

1: I use the fiducial mark as bad board mark. 2: First get the X sensor installed on the machine, then use method 1. 3: other methods: group boards according to which unit is X out. Then edit NC program to skip corresponding X out.

Processing x-outs

Electronics Forum | Thu May 08 21:19:46 EDT 2008 | davef

Don't allow x-outs. There has been previous discussions here in SMTnet that maybe found by searching the Archives. Steve Gregory calculated that printing paste on X-outs cost him about $50k a year.

X out marking

Electronics Forum | Tue Aug 18 13:43:52 EDT 2009 | victorp

Is there a standard (such as IPC) or common industry practice in regards with x-out marking on rejected boards of a panel? Do board shops have to X-out both sides of the rejected board, or one side? If the answer is one side, which side should be ma

Cost of using X-Out Panels????

Electronics Forum | Tue Apr 27 13:59:13 EDT 1999 | RG

Have there been any studies done on the actual cost of running X-Out's. Please provide any inputs you might have. RG

Processing x-outs

Electronics Forum | Thu May 08 17:26:06 EDT 2008 | rogercox

Are there recommended image reject marks in order to process x-outs from a PCB supplier? Do they have to be in the copper or will silkscreen suffice?

X-Out Board

Electronics Forum | Mon Mar 18 13:39:43 EDT 2013 | vpham

Please help, how do you skip x-out boards on a panel using Juki 2050 pnp machine?

part x-out from board when exit in mirtec offline pc.

Electronics Forum | Fri Dec 27 07:20:38 EST 2019 | dipak123

We have Mirtec MV-6 OMNI machine. If programer changes in part number ,then that part x-out from it's place.Value of X & Y incresed 10X compare to other parts in ATT.

  1 2 3 4 5 Next

x-outs searches for Companies, Equipment, Machines, Suppliers & Information

Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Selective soldering solutions with Jade soldering machine

IPC Certification Training from the comfort of your home or office
SMT Machines

Smt Feeder repair service centers in Europe, North, South America

MSD storage in desiccant dry canbinets