Electronics Forum | Tue Feb 10 05:58:14 EST 2015 | dberenguer
We have the possibility to buy a used Zevatech FS710 pick&place machine with vision. I've read that these machines used to be very well built but I'm wondering if it's capable to place 0603 parts accurately since it lacks a laser-type alignment AFAIK
Electronics Forum | Tue Feb 10 06:37:39 EST 2015 | dberenguer
Thanks Sarason for the link.
Electronics Forum | Tue Feb 10 06:29:45 EST 2015 | sarason
Ask the question in the Yahoo Zevatech group, It has many experienced Zevatech/Juki Users. https://ca.groups.yahoo.com/neo/groups/zevatech/info My program PCBSynergy will program this machine. pcbsynergy.com regards Sarason
Electronics Forum | Sat Sep 28 09:43:55 EDT 2013 | ernestodalluay
Hi Everyone, What is required magnification to inspect 0603 component? ernie
Electronics Forum | Mon Sep 30 09:12:18 EDT 2013 | rgduval
1 mm, recommended inspection range is from 1.5X to 3X magnification. For verification of rejects, 4X magnification is recommended. Cheers, ..rob
Electronics Forum | Wed Nov 13 15:05:48 EST 2013 | jimmyboz
With what machine? I cannot help until that is disclosed.
Electronics Forum | Wed Nov 13 16:48:19 EST 2013 | spoiltforchoice
I would expect any half decent machine to place 0603 parts slap bang on target to the typical defined accuracy for such parts on most machines of perhaps ~60 microns or better. Self correction during reflow is IMHO much less pronounced with lead-free
Electronics Forum | Wed Nov 13 15:33:08 EST 2013 | mondalaci
Good question :) I'd say with a machine that is available for an average pick and place operator nowadays. Our manufacturer is not fixed yet, that's why I don't have any specific. On a related note I'm wondering whether the machine is so importan
Electronics Forum | Tue Nov 12 17:11:32 EST 2013 | mondalaci
Hi Folks, I'm working on a LED display that is composed of multiple layers. What is interesting for the point of this discussion is the PCB layer and the light deflector layer on top of it. Please take a look at the related pictures at http://plus
Electronics Forum | Tue Jan 17 21:40:08 EST 2012 | gaz
I'm testing SN100C, and with our 5 zone oven I seem to be able to fix one issue by changing the profile, but that might introduce a new problem. Some profiles work very well on most components, but have issues on other components. These are usually 0
winsouce.jpg)