Electronics Forum | Wed May 22 10:27:23 EDT 2019 | emeto
Greg, this is a huge pitch. 0.16mm is safe for this size of part.
Electronics Forum | Wed May 22 12:00:13 EDT 2019 | gregoireg
Thanks. It starts to make sense. There is a formula at the bottom of this page: http://www.circuitinsight.com/programs/50456.html It says: Stencil Thickness = 2.64mil + 0.0831 * pitch of component in mil. for 1.13mm, that gives exactly 0.16mm. So,
Electronics Forum | Thu Jun 19 02:28:42 EDT 2003 | Desmond Bezuidenhout
I assisted a company in the design and manufacturing of a +/- 700l cabinet utilizing a controlled nitrogen environment to purge. Any enquiry call +27 (0)16 9335747 or write to my mail.
Electronics Forum | Wed Apr 13 21:31:36 EDT 2005 | Thaqalain
So,1005/0402 and 1608/0603 are same components except last numbers are in inches. For 0402: L=.04"*25.4=1.016mm: W=.02"*25.4=0.5mm which was for component 1005 as per JIA. Am I correct?
Electronics Forum | Fri Dec 13 10:06:05 EST 2013 | davef
For vertical mounted, axial leaded components; the standoff from the land to the component body should be 0.4mm[0.016in] to 1.5mm[0.059in]. Right?
Electronics Forum | Thu Sep 05 14:44:41 EDT 2019 | jbaez1
Looking for Pack Driver or driver unit 630 119 8361 from HSP4797 (Universal, Sanyo or Hitachi): Tag information: Pack Driver Model: D2890B S ver. 0.16 W ver. 0.00 Made in Japan
Electronics Forum | Mon Mar 30 16:02:44 EST 1998 | Michael Allen
| We have successfully put .016" vias in .030" pads. | There is no issue with .030" solder balls, since | the actual volume of the .002" via in pad is small | compared to the ball+solder paste volume. | We did notice random bubbles where, apparentl
Electronics Forum | Fri Sep 11 16:52:00 EDT 1998 | Dave F
0.050" -> 50 mil -> 50 pitch 0.80 mm -> 0.032" -> 32 mil -> 32 pitch 0.64 mm -> 0.025" -> 25 mil -> 25 pitch 0.50 mm -> 0.020" -> 20 mil -> 20 pitch 0.40 mm -> 0.016" -> 16 mil -> 16 pitch 0.20 mm -> 0.012" -> 12 mil -> 12 pitch Dave F
Electronics Forum | Tue Dec 17 08:46:59 EST 2002 | Randy Villeneuve
Personaly I would try a different solder paste. Give Indium a call and get a sample of their SMQ92J No clean. You will be impressed. Alpha and Kester also have good products but we have a long history with this paste and we have printed millions of b
Electronics Forum | Tue May 30 07:41:21 EDT 2006 | davef
Aspect ratio: The ratio of a via�s length or depth to its pre-plated diameter. So, in your case, either * 6=0.093/x, calculating x=0.093/6=0.016 as the smallest via hole diameter. ... OR * 6=y/0.01, calculating y=6*0.01=0.06 as the maximum board th
.gif)