Electronics Forum: 0201 component (Page 1 of 24)

Juki KE750 for 0201 component ?

Electronics Forum | Wed Aug 24 12:10:20 EDT 2011 | atgservice

Hi All I need some advice , hope you guys can help. Is Juki KE750 able to mount 0201 components? Well, according to the nozzle catalogue, there is a special nozzle ( No. 149 ) which is smaller in diameter than the Nozzle 101. It says that this noz

Juki KE750 for 0201 component ?

Electronics Forum | Thu Aug 25 17:31:10 EDT 2011 | emeto

Hi, we have 740 and I would never assume that it can place 0201. The new Juki machines like 2060 1080...can do it for sure but older machines I doubt it.

Juki KE750 for 0201 component ?

Electronics Forum | Fri Aug 26 16:28:27 EDT 2011 | fredc

I have a copy of the Juki catalog "e" and it shows the 750 capable of 0201s but not the 760. We have several customers that get 149s from us to place 0201s. We have also made a custom 101 with one small hole for several machines that would not re

0201

Electronics Forum | Fri Feb 22 08:23:51 EST 2008 | aj

All, I understand that there is a requirement to upgrade the narrow view camera on the Fuji CP642 to place 0201 components - is this necessary ? Also, 1 - What tape package to they come in ? Can you use 0402 feeders? aj...

0201

Electronics Forum | Fri Feb 22 10:27:03 EST 2008 | fastek

Well I've heard you must get the 0201, 0.4mm tape feeder to place an 0201 component as the 0402 feeder won't do it. They ain't cheap @ $1,000 each from Fuji roughly. Also you will need to get 0.4mm nozzles on your machine. Have you actually done thi

0201

Electronics Forum | Wed Feb 27 15:14:52 EST 2008 | gregf912

Senior, below, is correct. THe narrow view camera has to be upgraded in order to place 0201 components. Also to pick the parts you need the 0201 feeders. These feeders present the part 0.3 mm higher than the standard 0402 feeder. The part pickup heig

0201

Electronics Forum | Mon Jun 18 21:36:06 EDT 2001 | davef

Consider profiling from all of your problem components, not just your 0201.

0201 components

Electronics Forum | Tue Sep 14 09:41:22 EDT 1999 | Eric Christison

I'm hoping to use 0201 caps and resistors in a new design but so far have only found one company who makes such small devices (Murato). Can anyone direct me to any other supplier? Are there any particular problems associated with using such small

0201 Placement

Electronics Forum | Tue May 04 22:45:58 EDT 2004 | alwil

I want to find out if we can place 0201 components using a Fuji CP6-E 4000. If this is possible, do we require any upgrades to the machine. Is anyone doing this at present with this type of CP6. If so, what size of nozzle and feeder type is being use

placing 0201

Electronics Forum | Thu Jun 16 11:07:15 EDT 2005 | Arek

Walcome, I am looking for an information about repetability and accurancy of placing component 0201 on the machines: Assembleon Topaz Xi II and Emerald Xi II. What is your experinces and is it a good chose to buy them for placing component 0201.? Do

  1 2 3 4 5 6 7 8 9 10 Next

0201 component searches for Companies, Equipment, Machines, Suppliers & Information