Electronics Forum: 0402 pick problem (Page 1 of 118)

0402 pick problems

Electronics Forum | Sun May 20 20:53:19 EDT 2001 | Nozzles

www.enozzles.com

Re: 0402 pick problems

Electronics Forum | Thu Nov 16 18:04:40 EST 2000 | Dave F

We've not seen "pick problems". We've seen "release after pick problems" caused by adhesive on components, recently. Could be the came thing, though.

Re: 0402 pick problems

Electronics Forum | Fri Nov 17 11:52:41 EST 2000 | Stefan Witte

I've seen problems where the component was slightly thicker than the tape and popped out of the pocket upon transport. Is the component still in the pocket after mispick? Do you have access to a high speed camera or could rent one for a day?

Re: 0402 pick problems

Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL

Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos

0402 pick problems

Electronics Forum | Tue May 22 10:17:04 EDT 2001 | jdtpfacreate

Kris, Get that high speed camera in there. You have to find out what is happening after the pick point. Also just to throw in another possibility into your cause list. How about static electricty? It can effect such small components. My $ .02

0402 pick problems

Electronics Forum | Mon May 21 04:37:41 EDT 2001 | Bob

Hi, Kris You mean you have checked the tape&component demension,all in spec, But could you tell me the spec of the tape cave size,I mean how about the gap between the cave and component? Do you have such spec.for 0402 Component? Please inform us

0402 pick problems

Electronics Forum | Thu Nov 16 14:22:48 EST 2000 | Kris

Howdy Y'all, I have seen a problem lately with getting the 0402 parts out of the tape and onto a PCB. We are using Universal HSPs with 8 X 2mm feeders in good condition. The components are manufactured by Rohm. The tape and components appear to b

Re: 0402 pick problems

Electronics Forum | Mon Nov 27 17:59:56 EST 2000 | Dave F

Sounds like "place" problem doenit? As best as I can tell [ever notice how the trail get fuzzy pretty fast, when someone starts asking probing questions], we received someone caps manufactured by someone other than Rolm through a distributor. The p

Re: 0402 pick problems

Electronics Forum | Fri Nov 17 00:27:30 EST 2000 | DL

Kris, I gather from your description that the component can not be picked consistently. Meaning that the machine can place the component. How does the component place? Is the placement text book? Take a good look to see if the component isn't being

0402 pick problems

Electronics Forum | Thu May 24 08:40:18 EDT 2001 | toolman

hi kris well 0.02 cents south african money is a lot less. but anyway we have a customer with 3 lines all lines are the same equipment and we have had major problems with 0402s .on some manf reels .as a test we moved one reel around and the problem m

  1 2 3 4 5 6 7 8 9 10 Next

0402 pick problem searches for Companies, Equipment, Machines, Suppliers & Information

IPC Training & Certification - Blackfox

Easily dispense fine pitch components with ±25µm positioning accuracy.
PCB AOI

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
Electronics Decoating Agent

Best Reflow Oven
PCB Inspection services

World's Best Reflow Oven Customizable for Unique Applications
PCB Depanelizers

回流焊炉