Electronics Forum | Tue Jan 15 10:19:39 EST 2013 | boriskilk
For a multilayer board the thickest internal copper layer we will do is 0.062".
Electronics Forum | Tue Jun 28 18:20:49 EDT 2005 | russ
Matt, have you run a profile on this board? Just because it's .062" doesn't mean that any old .062" profile will work. We have .062" thick boards that almost nil for copper and other are utilizing 2 oz. layers internally. They require quite diffe
Electronics Forum | Tue Jun 20 20:31:12 EDT 2000 | Dave F
Chrys you're fine. On scoring: * Be sure spec material remaining, not what is removed. * Be sure that the v-grooves are perpendicular to each other, not off set. * Typ spec for for .062 thick boards FR-4 0.018-0.024 MC-3 0.030-0.040 * HADCO recomm
Electronics Forum | Thu May 31 15:32:56 EDT 2001 | dspilker
I saw a post from last year that quoted Hadco. For a .062" thick PWB, the remaining material was .012" +/- .002". This is close to what we have been using, but some PwB vendors are now asking for .020" +/-.005". This seems too thick for smooth bre
Electronics Forum | Fri Aug 06 08:54:52 EDT 1999 | James Armstrong
I am looking for a suppliers' of SMT Terminals on tape and reel to replace TH Terminals used on PCB assemblies. Dimensions required are approx: 0.093" high x 0.062" diam. Please contact me for further details. Thank you. JA/SR Telecom
Electronics Forum | Thu May 29 14:27:04 EDT 2003 | larryk
This flex is .001" Kapton polyimide. The flex portion of this rigid flex consists of 3 layers of 1 oz copper with 5 layers of Kapton. Part of the flex is sandwiched in standard FR4 with two layer of copper on each side for a finished thickness of .
Electronics Forum | Fri Sep 19 13:55:05 EDT 2003 | joeherz
Russ, I feel a little better now.... Baking specs...... Can you give me a tip on where to look? It's a 4 layer, .062 and roughly 5 inches square. Thanks.
Electronics Forum | Fri Nov 07 18:26:05 EST 2003 | jsloot
Is anyone using .062 aluminum circuit boards with copper conductors in your production lines? What kind of reflow profile is required? What special considerations are there to be looking for? I am asking for any information you can give me. Thanks
Electronics Forum | Tue Aug 30 15:39:37 EDT 2005 | esoderberg
We are experiencing cracking of 1206 .1uf/50V capacitors on our boards. Design is keeping the caps away from the board edge 0.200 and perpendicular to the longest edge but still they crack even in the interior of the board. Recommendations? bds are
Electronics Forum | Sat Dec 10 07:03:59 EST 2005 | mdemos1
Hi. I am trying to find out the minimum copper thickness I should see on a through hole barrel. The board has 1 ounce copper and the board thickness is 0.062". I am finding thicknesses of 0.6 to 1.2 mils. Thanks, Mike.
