Electronics Forum | Tue Apr 19 09:06:51 EDT 2005 | russ
1005 breaks down like this in mm. the "10" equals 1.0 mm, the "05" equals 0.5mm so, 1005. in inch conversion 1.0mm = .04", 0.5mm = .02" so 0402 (.04" x.02" = 1.0 x 0.5). Hope this helped.
Electronics Forum | Mon Feb 04 12:28:28 EST 2008 | jseagle
1.0mm (0.039") 1.75X >0.5 to 1.0mm (0.02 to 0.039") 4X 0.25 to 0.5mm (0.00984 to 0.02") 10X
Electronics Forum | Wed Jun 13 12:54:41 EDT 2001 | Dr. Harry
Does anyone have PCB thickness recomendations for .8 &1.0mm pitch bga's?
Electronics Forum | Wed Aug 19 13:25:18 EDT 1998 | Claude Clerc
I'm searching after a documentation about the jumpers of the motherboard v4p895p3/smt v1.0. Do you want to send me one, please ? Thanks Claude Clerc
Electronics Forum | Wed Apr 19 10:47:08 EDT 2006 | FredC
That is a small part. What nozzle is normally used a 1.0 or 1.3mm.
Electronics Forum | Thu Sep 10 12:40:27 EDT 2009 | davef
1*10E9~11] that you reference? What are the units of this number?
Electronics Forum | Mon May 01 10:26:14 EDT 2000 | Mike Naddra
I Have approximately 150-200 Fuji Cp4-3 8x4mm 1.0 TLC, LARGE Tail feeders. I am looking for an even trade for Fuji Cp4-3 8x4mm 1.0 TLC, SMALL Tail Feeders. If anyone is interested Please respond. Thanks, Mike Naddra
Electronics Forum | Fri Feb 01 09:34:54 EST 2008 | jdengler
In the PD for 0603 I have a min size of 0.7mm and a max size of 1.0mm and the CP4 size at 0.0mm. This way when you have 1.0mm nozzles in the machine it will use that and when you change them to 0.7mm it will use that. Both sizes work OK. -Jerry
Electronics Forum | Tue Feb 22 23:52:06 EST 2000 | Finepitch Services
Jax, I appreciate your opinion and no one is right or wrong during such information sharing. Please consider that we all inherit a system and keeping it in the same way is the choice in most cases. Also, "keeping the mm across the house" is not gi
Electronics Forum | Mon Nov 04 16:54:13 EST 2002 | pjc
For me it was the 1.0mm nozzle, if we're talking mini-MELF here. Also, slowing the turret speed helps. Had mine at 30%. Results vary if placing on paste vs. glue. Paste is better. Still, the std. 1.0mm nozzle is where near as good as with the MELF no