Electronics Forum | Thu Sep 16 16:04:58 EDT 1999 | Mini Mike
I am not familiar with the "mil" metric. How many inches is in 1 mil? ...or 10 mil?
Electronics Forum | Thu Sep 16 16:16:16 EDT 1999 | Power Circuits, Inc.
| I am not familiar with the "mil" metric. How many inches is in 1 mil? | | ...or 10 mil? | | 1 mil= .001 inches 10 mil= .010 inches Also, it has nothing to do with metric.
Electronics Forum | Mon Jan 14 18:19:35 EST 2008 | geb
Thanks for the info. I use the machine with a 1mil for resistors and capacitors and the machine with the 2.6mil for ICs (both have a 4mil.) This is because the r's & c's seem to benefit from the 1mil, more than IC's. I was thinking of making the mach
Electronics Forum | Thu Sep 16 16:16:47 EDT 1999 | Earl Moon
| I am not familiar with the "mil" metric. How many inches is in 1 mil? | | ...or 10 mil? | | each mil = .001" Earl Moon
Electronics Forum | Thu Apr 29 10:11:41 EDT 1999 | Cunli
| Can anyone in this world produce such small PCB/PWB trace widths? Lots of theory so far, but have not found anyone yet who can do it in practice. | Dan, I have seen boards with 3 mil pitch (that is 1.5 mil trace and 1.5 mil spacing) in quantity
Electronics Forum | Thu Sep 16 20:37:08 EDT 1999 | Dreamsniper
| | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | ...or 10 mil? | | | | | 1 mil= .001 inches | 10 mil= .010 inches | Also, it has nothing to do with metric. I was also confused with this standard of measuring bef
Electronics Forum | Sun Feb 28 20:05:54 EST 2010 | aungthura
Dear all There are alot sockets in our products,BIB.These skts are lifted abit after being solderd with wave machine.If the skts become lifted, how much tolerance of the high is acceptable? as example 1mil~5mil,or,1mil~8mil. Pls advise me. Thanks in
Electronics Forum | Fri Sep 17 03:46:31 EDT 1999 | Charles Stringer
| | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | ...or 10 mil? | | | | | each mil = .001" | | Earl Moon | At risk of informing someones grandmother on the art of removing the contents of an egg without breaking
Electronics Forum | Mon Jan 14 17:36:29 EST 2008 | flipit
SWAG is right on the money. I had a 0.5 mil per pixel camera and a 1 mil per pixel camera. As you increase magnification your focal range goes down. So your part height becomes much more critical. Parts out of focus will be rejected to the dump b
Electronics Forum | Mon Jun 14 21:02:50 EDT 2004 | hap
it is not practical to target an exactly 1 mil film thickness, the materials manufacturers do not give an exact solid content figure but only a target range. temperature and batch preparation also play a small role. You could probably target 1 mil p
