Electronics Forum | Fri Oct 29 15:20:24 EDT 2004 | nxt
Thanks, however this is not the technology that I'm interested in. Bartector is for setup verification of feeders. I am in need of a feeder vendor that can provide a feeder to present a barcode label to a placement machine for placement onto a pcb
Electronics Forum | Fri Oct 29 15:02:59 EDT 2004 | Ran
Hello Everybody, I am looking for screen printers and would like to know , what options do i have? I did some research on manufacturer's and it seems that DEK,MPM and EKRA are the available options for me. what criteria i should look for before slelc
Electronics Forum | Sun Oct 31 09:19:26 EST 2004 | Steve
I believe on High Temp. Spheres you require paste eutectic 63/37. The solder paste forms an intermettalic bond to the pad and a bond to the surface structure of the high temp sphere. The standard 63/37 alloy spheres will melt during reflow and form t
Electronics Forum | Wed Nov 03 19:56:50 EST 2004 | Dreamsniper
Hi, I wanna know if I immerse my fully populated PWB in a solution with 90% IPA and 10% De-ionized water at 80'C, will there be a problem or issue? Will my board or components be damaged? Will my PWM Mask peel off? What are the possible damage that
Electronics Forum | Mon Nov 08 15:10:52 EST 2004 | russ
We usually get some mask material from our board house. It cures with heat so it works really well in our applications. Be wary of the "overcoat pens" they don't seem to hold up under heat and thre solder will flow right underneath it during BGA a
Electronics Forum | Tue Nov 09 14:21:00 EST 2004 | Dreamsniper
Thanks Russ. When solder paste is applied, you can't see the pads. Because my aperture reduction is 5% - 10% of the pads. Pads are reduced by almost and up to 20% by the PWB Fab and the paste covers the pad. We cal align and inspect but very hard as
Electronics Forum | Wed Nov 10 11:21:37 EST 2004 | jmedernach
Hi Folks, Does anyone out there know the names of the manufacturers of batch style vapor phase reflow systems. I'm not interested in anything in-line. I'm looking for relatively small footprint systems. I've come across Wenesco and Sintronex. Doe
Electronics Forum | Wed Nov 10 11:21:39 EST 2004 | jmedernach
Hi Folks, Does anyone out there know the names of the manufacturers of batch style vapor phase reflow systems. I'm not interested in anything in-line. I'm looking for relatively small footprint systems. I've come across Wenesco and Sintronex. Doe
Electronics Forum | Wed Nov 10 21:30:19 EST 2004 | Dorklover664
No. What are they and where can I find more info. on them? We are using Red-E-Sets and I hate them. They take forever to set up and I feel that they aren't as good as some of the supports that I have used in the past. But we got a 30 day trial so for
Electronics Forum | Mon Nov 15 12:14:47 EST 2004 | Kevin Upton
We have a Camelot 5000 with vision, but no manual. Serial number is 653 and was manufactured 4/94. I used one like this about 10 years ago but it had no vision. If anyone could help me out with a manual, I'd appreciate it. We've already checked with
.gif)
