Electronics Forum | Wed Oct 04 13:06:21 EDT 2006 | greg york
Sorry Bert For some reason I'm not getting the Email notifications so appologies never saw the reply. The mettalic antidrossing agent reduces the dross to levels of est. 50% less than compared to 63/37 alloy. When used with SACP/0307 alloy and SACP/
Electronics Forum | Thu Aug 03 10:20:33 EDT 2006 | razor1491
Good morning, I am unaware of any links but to prevent any concerns we went out and purchased seperate squeegees from (http://www.transitionautomation.com/squeegee.html) and they are marked appropriately and kept seperate cabinet away from Leaded squ
Electronics Forum | Fri Aug 04 07:44:09 EDT 2006 | aj
Hi, Have you incorporated any Aperture Modifications in your stencil.( i.e. Homebase / 10% reductions). I have a similiar problem here with one of our high volume builds and I am in the process of ordering a new stencil with recommeded aperture red
Electronics Forum | Thu Aug 10 14:52:08 EDT 2006 | russ
Should be some numbers on the top of the other two. If you can read them we can get you the right part info. it also looks as though you have some trace and pad damage that will require repair prior to you putting down new part. Or you can remove
Electronics Forum | Tue Aug 22 10:51:49 EDT 2006 | rmitchell
Hi, Hope your machine is back up and running. Are you sure it is not program or PD (part library) related? Try power off and back on and delete the machine program from the machine. Then- Power off and back on and see if the VP error is gone. It
Electronics Forum | Wed Aug 23 02:48:11 EDT 2006 | ec
Hi, Appreciate someone could advise or forward a format to me how to work out number of pallet needed for wave-solder if the machine speed is at 1.0m/min, volume per month is 4500 sets, pallet length 0.3 meter, conveyor length 5 meter...... Looking
Electronics Forum | Thu Aug 24 12:45:16 EDT 2006 | CKH
Hi Folk, recently, i have found about 5% of the PCBA failed because of the faulty 10uF Cermanic Chip - Short Circuit. Will this Ceramic Chip cause during the SMT Process (e.g Temperature), Functional Testing or from it Original incoming Capacitor (M
Electronics Forum | Wed Aug 30 10:09:08 EDT 2006 | digisys
I have an old Amistar MT-5500 which I use for small proto runs. Is someone has a copy of the off line programming software? It has 5 little programs useful to convert from PC protocol to Amistar. (tt.exe, 556edt.exe, 556fd.exe, 556mg.exe...) Mach
Electronics Forum | Thu Sep 07 10:13:42 EDT 2006 | davef
Contact peel force equipment manufacturers, tell them what you want to do, and ask them for the contact information of their customers in your region. Some prominent peel force equipment suppliers are: * RVSI/Systemation TP-150 * EPI PTS-2001 * GPD
Electronics Forum | Fri Sep 01 10:12:06 EDT 2006 | dmascare
I forgot to mention, for the 60K rpm spindle with 13" X 19" work area I am in about the $21K to $24K price range. The 6K price differential is due to t-tech offering a 15% percent educational discount. LPKF would only give me at most a 3% GSA disco