Electronics Forum | Thu Jun 12 11:11:45 EDT 2014 | emeto
What you need here is a double print process. You should have 5mil stencil for SMT followed by a 10-15mil stencil for TH. I don't know what quantities you are running or do you have the capability to add another printer in the line, but that would be
Electronics Forum | Thu Jun 19 10:31:28 EDT 2014 | emeto
Hi Edri, this is not a race here. Are you curing some kind of glue on your board? THe shortest profile I ever ran is for AIM solder paste - about 4 minutes total. with speed 8m/min your profile is going to be 45 seconds and I don't think this is the
Electronics Forum | Fri Jun 20 08:04:21 EDT 2014 | emeto
0.8m/min is a different story. I run my 10 zone reflow ovens with that speed all the time and never had a problem. For the short profile I mentioned the speed I used is even higher(about 1.25m/min). No issues with parts moving. Regards, Emil
Electronics Forum | Tue Jun 24 11:58:55 EDT 2014 | markhoch
We had both a MY15 and a TP11 both with tray wagons and we taped strips to the tray wagon all the time with great success. we used double sided tape, sometimes with magnets, and then created "trays" as if the tape strip was a matrix tray. (1 x 10,15
Electronics Forum | Thu Jul 10 19:26:21 EDT 2014 | guts1872
It looks like we did have an interlock problem. Maintenance re possitioned them and it seems to have cleared up our problem. For some reason when we close the door, it still wants to reset the Amp power, but if we wait for the all clear in the GUI be
Electronics Forum | Sun Jun 29 10:55:00 EDT 2014 | mario85
Hi Everyone I'm new here. I am looking for a FLEXA 4.6.1 software. I have to refresh my knowledge of programming. Does anybody have this software? I'm also looking for some kind of tutorial regarding creating new programs from the scratch. Maybe the
Electronics Forum | Tue Jul 01 10:17:30 EDT 2014 | sargeredarmy01
Hi Everyone, Just wondering out loud, what type of inspection stations do you guys have for post re-flow? Currently we are using just a bare bones visual station. Is there any recommended station that works well? Or is it just a "whatever fits" kind
Electronics Forum | Thu Jul 03 09:27:10 EDT 2014 | torch
Hey guys wonder if anyone can help me, having an issue with our Quad QSP2, at the moment it is displaying Tep2 - Send Status command failed Tep1 - Send Status command failed and there is no response from the gantries, the interlocks appear to be wo
Electronics Forum | Thu Jul 10 20:58:21 EDT 2014 | andrespena
Smaller companies many want to rent a machine, but may not necessarily use it 24/7, and a smaller machine may require less expertise to use. If many small machine can work fast enough, it can operate for less time and reduce operating costs. (I'm mo
Electronics Forum | Thu Oct 02 15:34:08 EDT 2014 | arifa_anees
the data collected from a standard SMT process is typically very noisy due to the natural.Initially, the most common evaluation method was placement yield.Offset Placement After Solder Screen-printing can reduce or eliminate these defects through cor