Electronics Forum | Wed Oct 23 13:01:11 EDT 2019 | compit
I have a single-view camera on a Topaz-X machine. When I define a connector type element - it displays messages like in attached files. If I change the type to IC - no problem. There is also no problem when "learning&quot
Electronics Forum | Mon Oct 28 21:56:56 EDT 2019 | sarason
I presume you mean at microwave frequencies. If not get it right in the CAD. Programs such as Microwave Office and VSS make it easy. Also Ansoft, Keysight Eagle etc. Having used MO and Eagle I would heartily recommend them. In the bad old days one tr
Electronics Forum | Tue Oct 29 21:27:21 EDT 2019 | aqueous
It depends on the flux type. If it's water soluble, it should be cleaned soon after reflow because OA flux remains active after reflow. If it's rosin or no-clean (low-residue), then the only concern is the longer wait time, the more difficult it will
Electronics Forum | Thu Oct 31 13:46:40 EDT 2019 | johnce
Hello, I have searched the forums for this specific topic, but can not find the clarification I would like. I am setting up a baking system to "reset" SMD components using a vacuum-bake oven. According to the JEDEC-STD-033 standard, depending on th
Electronics Forum | Sat Nov 09 19:10:18 EST 2019 | richardcargill
Hi, I just set one of these up a month or so ago, so it's all pretty fresh. The 265s have a pressure sensor amplifier box that needs calibration using the OEM calibration jig. OR you can use a 3 quid digital luggage scale from Ebay. The calibratio
Electronics Forum | Mon Nov 18 10:37:47 EST 2019 | archieb
Hello. My company has a Cyberclean 3000 model 32rf screen cleaner, and we're in need of someone that knows how to get it up and running. We purchased it secondhand from a different company. We have instructions, that don't tell us a whole lot. We thi
Electronics Forum | Tue Dec 10 15:43:56 EST 2019 | SMTA-Norah
The short answer is people are still arguing about what the standard should be. A max voiding between 25-30% depending on who you ask. Also if those are capped vias they can still cause voids because bubbles are attracted to the irregularities in t
Electronics Forum | Mon Nov 25 10:57:31 EST 2019 | rgduval
You should be able to see the counts in the service screen for the motors while testing them...that's usually the easiest way to see if they're functioning...at least the encoders. In some of the older systems, the drive motors were all the same, an
Electronics Forum | Mon Dec 02 10:45:04 EST 2019 | slthomas
*You* may be well versed, but not every designer is experienced or even familiar with DFM. I don't care how sophisticated the circuitry is, if you can't build it it's a lousy design, and as an EMS we see many designs that shouldn't have passed the
Electronics Forum | Wed Dec 04 18:10:07 EST 2019 | thunder
No they weren't added, never been serviced. The top legs don't have that hard wire exposed,just the bottom 2. It seems when the connection broke {bad solder failed from TV being turned on and off going from heat to cold ?} them jumper wires appear
