Electronics Forum | Mon Oct 26 11:11:48 EST 1998 | John Hardy
We have installed a Sonoflux atomized mist fluxing unit (Model 9500)on our Future 1 wave solder machine. We are concerned that the retrofitting of this unit may not have been appropriate for our equipment, as we are now experiencing many problems wi
Electronics Forum | Mon Oct 26 19:48:14 EST 1998 | Scott B.
| | What are the key feature to look for in buying a profiling product for Reflow ? | | | | Who's is the best and how much do these systems cost ? | | | | Thanks in advance. | | | | Hi Mark, | | I am currently the oven sector engineer for a larg
Electronics Forum | Mon Oct 26 20:18:23 EST 1998 | Dave f
| I need some info on how to stop the bridges I'm having on | radial and axial parts that are in the same place on every board. I'm also having problems with sot-25 bridging. I'm using a Electrovert E-pak. I tried leveling the machine,solder pot, an
Electronics Forum | Fri Oct 23 09:29:29 EDT 1998 | Allen
We've got a continous flow cooling problem from our wave solder process into ICT. Our current configuration is a flatbelt conveyor into a manual de-pallet process, operator then places on to an edge conveyor. We've tried muffin fans, look good but
Electronics Forum | Fri Oct 23 14:58:40 EDT 1998 | Dave F
| We've got a continous flow cooling problem from our wave solder process into ICT. Our current configuration is a flatbelt conveyor into a manual de-pallet process, operator then places on to an edge conveyor. We've tried muffin fans, look good bu
Electronics Forum | Wed Oct 21 16:23:11 EDT 1998 | Jeffrey Long
My company is looking for higher density for card layout. One suggestion has been locating active components packaged in SOT's and SOIC's on the B-side of the card. This in turn will require wave soldering of the above mentioned components. When I di
Electronics Forum | Wed Oct 21 14:28:17 EDT 1998 | Earl Moon
| I'M LOOKING FOR A SOLVENT TO MAKE REMOVING EPOXY FROM THE BOTTOMSIDE OF BOARD ON SMT COMPONENTS. THIS IS MOST IMPORTANT AFTER THE EPOXY HAS CURED AND EVEN RAN THROUGH THE WAVE. I'M LOOKING FOR A WAY OF | MAKING THE REWORK PROCESS ON THE CURED EPOX
Electronics Forum | Thu Oct 29 01:21:38 EST 1998 | Erhard
Thinking about that 180� turn unit again: You wouldn't require the the y-movement. The fixed side gets turned over to the other side anyways. | My suggestion would also be to leave the Fuji direction the way it is. (It's more standard anyways?) and
Electronics Forum | Tue Oct 27 09:57:37 EST 1998 | Dave
I completely agree with what Dave said previously about the trimming process. I spent the first 6 months at my current job removing this process from our assembly floor. We had several problems with the process including: 1) "flags" from the leads
Electronics Forum | Fri Oct 23 15:15:51 EDT 1998 | Dave f
| I am looking for detailed information on the SECS 2 protocol that is part of the SEMI General Equipment Module interface. I was not able to get detailed information from the SEMI web site and was not able to find anything on the web. | | I am look