Electronics Forum | Tue Jul 30 21:50:49 EDT 2002 | davef
Interesting dilemma. This is a forum for solving technical problems and whining about issues that no one else cares about. ;-) Consider: * Taking your search to the SMTnet 'Marketplace' [it's in that blue bar across / near the top of the page]. *
Electronics Forum | Wed Jul 30 00:05:05 EDT 2003 | praveen
Hi, I am observing warpage in the PBGA during reflow in rework machine.Reflow profile is std. (Peak temp is 214 deg C using 63/37 paste). Please advise what should be the gap between the nozzle and the BGA body during reflow process in SRT BGA rework
Electronics Forum | Thu Jul 31 15:29:25 EDT 2003 | bcceng
A couple of things you can look into 1. The proper bottom pre-heat of board. If you are applying only direct hot air to BGA without preheating can cause BGA's to warp and collapse un-even. 2. Moisture on you BGA's. If BGA's were not properly packa
Electronics Forum | Mon Aug 04 17:35:08 EDT 2003 | Dean
If you lay a flat edge on the PBGA, it is visibly warped? How much of a warp? 0.001, 0.010, 0.050 what? What is your pcb temperature just prior to entering the spike process (zone or step or what ever you call it)? Is it between 165 and 175 C?
Electronics Forum | Wed Sep 17 10:49:48 EDT 2003 | davef
We agree. Colin Lea showed that HASL less than 2 microns [80 uin] thick has limited shelf life and that shelf life gets worse as the HASL gets thinner. Unless you do not need shelf life, consider sticking with 100 to 500 uin. There is nothing wrong
Electronics Forum | Thu Sep 25 17:35:28 EDT 2003 | denis
To be precise, the component is a Xilinx Virtex platform FPGA with 1152 balls. We also assemble some DSPs up to 1000 balls with metal cover. At best, we can remove the components but it is almost impossible to find a working solder profile using IR.
Electronics Forum | Fri Oct 24 09:03:34 EDT 2003 | Bill
Has anybody had to replace the rear LCD monitor on a 4796 HSP chipshooter? Universal is quoting 10k (!) for a new one as they are hard to locate. Patlite (the LCD manufacturer) has discontinued the unit GSC-1000ARS-W and is unable to help. If an
Electronics Forum | Tue Mar 02 21:05:38 EST 2004 | Ken
Has anyone in the US used this system? I am told that over 1000 systems are operating world wide...but find it hard to believe no one domestically is using this (if it in fact is worth its salt would more not use it?) Anyone? Anyone demo'd this? A
Electronics Forum | Thu Feb 12 14:26:22 EST 2004 | Kris
Hi all, We have a PCB without any BGAs on it which goes into harsh environment.We therefore conformal coat it. After assembly the PCBs are expected to withstand "85degc/85%RH for 1000 hours" We now want to add a BGA to the PCB. Does any one have
Electronics Forum | Fri Feb 13 09:17:11 EST 2004 | Kris
we are worried about the coating not being able to cover underneath the BGA. If the coat is excessive then it would cause CTE issues. Also if anybody has data on 85/85, 1000 hrs after conformal coating of BGA, would appreciate if you guys can share