Electronics Forum | Wed Aug 07 18:53:20 EDT 2002 | melo_guy
I dont know what kind of volume you use in crystals, but my company manufactures crystals and oscillators, and if the order is over 1000pcs we'll put it on t/r if that what u request. If we dont have any t/r components in stock, well put them on t/r
Electronics Forum | Wed Jun 25 18:04:49 EDT 2003 | MikeF
It looks like we'll have to go the conductive process tray route. I looked through web sites for Brick Container and several other esd suppliers and did not find anything that would work. I saw the tray you mentioned in my Techni-tool catalog, but wa
Electronics Forum | Wed Jul 09 10:55:51 EDT 2003 | Veronica
Hi Reman01, I have done that before when I was in Motorola. What kind of ball are you trying to repair? How many pieces of BGA chip do you need to repair a day? If it is not too many, you can do it by yourself. It is a lot, such as 100 to 1000 piece
Electronics Forum | Tue Jun 15 16:16:29 EDT 2004 | Igor
Our research group is looking for a more efficient method of coating a small piece of sheet metal. We have a 1.5cm x 1.5cm very thin sheet of metal that we are coating with liquid epoxy, using a brush that was provided. This method has become unacc
Electronics Forum | Fri Jun 25 09:19:12 EDT 2004 | tjensen
60-70% RH will be a challenge if you are running a water wash solder paste (and could be the reason you are seeing the problems). If you are running a no-clean, humidity should not be an issue. As long as the profile looks OK, I don't think the con
Electronics Forum | Tue Jul 27 07:06:59 EDT 2004 | davef
HASL Thickness: * HADCO DFM manual specifies a nominal thickness of 50-1500uin with an option for 100-1000uin * Merix DFM manual specifies 30-200uin * Our boards (from a major fab) average 500uin with an "as measured" range of 300-800uin Be careful
Electronics Forum | Thu Sep 16 21:46:16 EDT 2004 | jeremyt
I work for a major OEM as well, and we have close to 1000 stencils in house. We just recently went to a new way of labeling our stencils. We ordered metal ID tags out of McMaster, and assigned a Number to each stencil. We then attached each tag to t
Electronics Forum | Wed Dec 01 19:21:15 EST 2004 | cmiller
You can make one out of a stainless steel tank pretty easy. Cost maybe $1000.00. You will need some hot plate type heaters and some copper tubing with a water flow source to keep the vapor down in the tank. We used two fluid types so one blanketed t
Electronics Forum | Sun Nov 14 17:29:57 EST 2004 | donb
I'm glad I dropped in here. I am about to buy some tooling for a Fuji GP-641E. I have been told to get the Red-E-Set, but from this discussion I'm not sure if that's a good idea. The local dealer wants US$1000 each for the 24" segments, we would pro
Electronics Forum | Mon Nov 15 15:31:54 EST 2004 | GP
We are looking for machine that can do the following: bonding of 0.5x0.5x0.8mm mm cramic part. - detect target surface position 1.5x0.8mm - dispance a drop of 0.8mm of epoxy adhesive on trget surface with position accuracy of +/-0.04mm. - pick the 0.
