Electronics Forum | Mon Apr 03 09:58:49 EDT 2006 | PWH
Sounds a little like 2" O.D. pipe with 1" wall thickness.
Electronics Forum | Tue Apr 04 11:51:44 EDT 2006 | dougs
10mil square apertures should be ok with your 4mil stencil.
Electronics Forum | Mon Apr 03 07:46:21 EDT 2006 | cyber_wolf
I have a pad layout that has .010" dia. with .010" spacing. Going to use a .004" foil. I know I need to over print them, but how much without causing bridging issues ? Thanks, Sr.
Electronics Forum | Tue Apr 04 14:00:48 EDT 2006 | russ
I have used a .013" square under these conditions. Limited run but all were good. 72 qty in 1 batch run
Electronics Forum | Tue Apr 04 14:12:54 EDT 2006 | cyber_wolf
I did the apertures 1:1 using an Invar foil material. I will post and let you know how it works out. Thanks
Electronics Forum | Tue Aug 17 08:46:04 EDT 1999 | M Cox
| | I don't know if you have tried this but... | | What if after removing the bad connector, while the holes are still molten you insert the new one right into the holes? | | | | This is the way we do it, and it seems to work | | | | Good luck | |