Electronics Forum: 1800 (Page 1 of 15)

Heller 1800 exl wiring

Electronics Forum | Wed Jun 21 01:49:10 EDT 2017 | bukas

Thank you Bilal, i am aware that you can't run 3x240 machine at 3x380V, that is why i have delta-delta transformer. It was phase sequence after all, and machine is now running. Thank you all for your help.

Heller 1800 exl wiring

Electronics Forum | Wed Jun 14 18:33:39 EDT 2017 | caurbach

1. Why isn't an electrician doing this? 2. Did you measure phase-to-phase voltage between each phase at the machine? 3. Phase rotation only affects the 3-phase motors. If it's out of sequence, the motors will spin backwards but everything else sho

Heller 1800 exl wiring

Electronics Forum | Wed Jun 14 03:21:29 EDT 2017 | bukas

hello everyone, I got a Heller reflow oven that operates at 3x240V and a delta-delta transformer since my grid is 3x380V. the problem I have right now is that there is no neutral line at delta-delta transformer, also there is no neutral line at oven

Heller 1800 exl wiring

Electronics Forum | Thu Jun 15 14:51:37 EDT 2017 | bmalhi

If machine serial tag referring to 3Ph, 208-240V then you cannot apply 3Ph, 380V. In order to use 3Ph, 380V supply you have, machine needs to be retrofitted to work with this voltage. If you apply 380V without voltage conversion, you will damage som

Heller 1800 with Gen 9 Flux Cooling

Electronics Forum | Wed Aug 27 14:41:10 EDT 2014 | leeg

We have just acquired a Heller 1800 with the Gen 9 Flux unit on, a couple of questions, is the Gen 9 a good unit? Does it have a standalone cooler? Is it easily retro-fitted out if we decide we would rather have normal extraction?

Please Help: Pace TF 1800 or Finetech CorePlus

Electronics Forum | Tue Apr 02 11:53:11 EDT 2019 | pace_worldwide

For more information on the TF 1800, please see our YouTube video at http://www.youtube.com/watch?v=Y_nqXp_BrvE&t=45s or go to our webpage at http://www.paceworldwide.com/products/area-array-bga-rework/bga-rework-systems/tf-1800-bga-csp-qfn-smd-rewor

Please Help: Pace TF 1800 or Finetech CorePlus

Electronics Forum | Tue Apr 02 11:11:15 EDT 2019 | pace_worldwide

We can set up an on-site demonstration of the TF 1800 if you would like. Are you in the US?

Please Help: Pace TF 1800 or Finetech CorePlus

Electronics Forum | Tue Apr 02 11:47:53 EDT 2019 | jchris

Sorry, never used (or heard of) the Finetech CorePlus.

Please Help: Pace TF 1800 or Finetech CorePlus

Electronics Forum | Tue Apr 02 11:48:42 EDT 2019 | lapskrfc

Thanks a lot for all your help

Please Help: Pace TF 1800 or Finetech CorePlus

Electronics Forum | Tue Apr 02 10:02:39 EDT 2019 | lapskrfc

Thanks a lot for your reply and the useful information you provided. By any chance, have you heard anything about the Finetech CorePlus?

  1 2 3 4 5 6 7 8 9 10 Next

1800 searches for Companies, Equipment, Machines, Suppliers & Information