Electronics Forum | Mon Sep 24 20:34:46 EDT 2012 | saduquette
Hi All, I have a Quad 4C that the quadalign processor started acting up on. Where the Hand Held Progrmmer would hang at "Laser Align Init" when you first turn the machine on. A couple of times I was able to get it running by pressing the re
Electronics Forum | Sat Sep 29 02:58:18 EDT 2012 | ericrr
I tried to look for "H890" on Internet and went nuts, (Thanks to Google) I would think H890 is part of a diode manufacturer part number. Have you tested it for a diode function? or maybe you have this is why you want a replacement. Tantalum capacito
Electronics Forum | Tue Oct 09 21:45:21 EDT 2012 | davef
Hi Bob Ideas to consider are: * Use your handheld XRF * Swab vinegar on the copper and watch it brighten * Use the following procedure Nearly all copper minerals can be dissolved by melting with a mixture 1:2.5 of ammonium chloride and ammonium nit
Electronics Forum | Thu Oct 11 09:54:30 EDT 2012 | rgduval
I've inherited an old HTI screen printer, and have been told that it was in operation before it was sent to my shop. I'm now trying to get it working, but, with no knowledge of the printer or the control system, I keep banging my head against it. A
Electronics Forum | Fri Oct 19 16:02:20 EDT 2012 | davef
Hi Phil ... Here's a response from Heller Industries ... If I understand correctly you want to tight the tolerance window between set point and present value. Actually you can do so by lower down the warning band to 5C which is default 15C. Please
Electronics Forum | Tue Jan 22 15:33:20 EST 2013 | hegemon
Funny how things can be looked at from two sides. Not sure what would be considered low volume in the above post. Our first KISS machine has been producing product for well over 4 years now, double shifts every day, and about 50% of the saturdays
Electronics Forum | Fri Dec 07 12:14:18 EST 2012 | sarason
A few years back I got a splinter of steel in my eye which destroyed my super good eyesight. Which now means it is difficult for me to work in electronics. The pain of steel was difficult to explain but, a year earlier I had a nail shot into my finge
Electronics Forum | Wed Feb 13 07:00:59 EST 2013 | spoiltforchoice
Low-Medium volume and Low Budget are difficult for others to quantify. I'm not familiar with GEM's but if the AX-201 suggested above can use your existing feeders its obviously got a leg up on the competition. Otherwise, to some extent your choice mi
Electronics Forum | Wed Feb 20 15:20:34 EST 2013 | hegemon
Depending on your requirements, you could range from a hair dryer, heat gun, toaster oven, hot plate, on up to digitally controlled surfaces and convective systems. You'll have to gauge for yourself whether you are just trying to add some heat energy
Electronics Forum | Wed Apr 24 09:16:44 EDT 2013 | eadthem
What OS dose the machine have. Look on the maker plate there will be a 4 digit number and a letter. What is this model number. Universal machines shuld come with software on them called voyager. This is all of the documentaiton and manuals you
