Electronics Forum | Fri Dec 19 17:39:07 EST 2003 | pdeuel
Dose the tolerances for the cutting blade and anvil on a HSP-4792 allow for sharpening. Replacement blades are over 2k$ and Universal tells me that tolerances wont allow sharpening. Can a percision sharpening shop be reccomended. Thanks in advance fo
Electronics Forum | Fri Jan 02 05:33:02 EST 2004 | p.LAKSHMANAN
1.Can stencil be considered in Tool Management? If so what shall be the criteria? Is there any study conducted on Stencil Life. 2.Any footprint is available for Feeders in tool management.
Electronics Forum | Tue Jan 13 20:56:29 EST 2004 | davef
You have too many rules. Priority #1 melt the solder. Priority #2 worry about the other stuff. Priority #3 count the fly shit.
Electronics Forum | Tue Jan 13 07:44:48 EST 2004 | Chris Cottreau
Upon inspection were seeing most if not all of these SOT 23 are not reflowed properly. The components just sit on top of the solder, this is creating insufficients, poor wetting, etc. There are about 25 SOTS per board, 2 boards per panel creating alo
Electronics Forum | Wed Jan 14 19:45:40 EST 2004 | adlsmt
Looks like this only runs on OS/2. Anyone out there familiar with it that could give some guidance, it would be greatly appreciated.
Electronics Forum | Tue Jan 27 07:56:15 EST 2004 | siverts
Don't forget the monitor's. There are only two ways to get out of this problem, if the monitor get's magnetizised: 1. Replace the monitor. 2. Turn in the monitor to a Tv-repairman that can do a de-magnetizing of the monitor.
Electronics Forum | Tue Jan 27 14:32:37 EST 2004 | fritschusa
Assembleon machines are extrememly flexible and adaptable. Their service / tech support is outstanding. I consider them a leader in our industry. My shop is low/mid volume high mix. I have kits of 1 to 10,000. 0201 to 56mm^2.
Electronics Forum | Mon Feb 09 04:45:14 EST 2004 | Evtimov
Hi Greg! I know that machines. What I can tell you is they are for low series production( The speed is almost 1/2 of given) and not very accurate(laser system). I don't know about the price. May be that's their big advantage.
Electronics Forum | Tue Feb 17 15:38:18 EST 2004 | cyber_wolf
I agree with dry wiping. We have 4 SPM's and 2 AP25's, we have never had a need for solvent. I would be cautious using alcohol/ or alcohol based solvents.
Electronics Forum | Thu Mar 11 11:49:22 EST 2004 | caldon
www.ox3.com has a great web site. 1) they have a pdf that you can use for $ or 2) they have an online glossary with parts and cost available. Cal
