Electronics Forum | Wed Jul 21 12:19:01 EDT 2010 | mb_mfg
To eliminate warping during processing, we have provided customers with composite fixtures to support the board on all 4 edges, with retractable pull down claps that can be added to the top of the PCB after the screen printing. Simply by pushing the
Electronics Forum | Wed Aug 04 16:10:42 EDT 2010 | martingruber
We are facing with the Samsung CP20-CV the following problem: wenn we run production the machine stops after the second pcb. No error or system message appears. The only way to go on is go back to the iddle modus, load the program again, go to the ru
Electronics Forum | Wed Sep 01 08:25:31 EDT 2010 | sachu_70
Tombstoning is a result of imbalanced force experiences by the device during reflow due to unequal behavious of the solder paste across all sides of the device. Could be due to many factors a few of this are: (1) Unequal solder mass distribution, (2)
Electronics Forum | Tue Aug 10 15:21:46 EDT 2010 | tanderson
I'm having problems with Quad QSP-2 pick n place machines recognizing fiducials. We are cleaning the fiducials, but that's tedious and time consuming ( I don't know anyone who routinely cleans them). We have solder mask clearance around the fiducials
Electronics Forum | Wed Aug 11 06:40:51 EDT 2010 | bob
If the fiducials are bad. There are 2 lights on the downward camera. The one that you can see is mainly used for bright and shiny fids....the other light is for dark/dirty fids. Turn this light on and set the other for 1 (not 0 because of a software
Electronics Forum | Wed Sep 01 08:16:55 EDT 2010 | sachu_70
Drill holes or tooling holes have higher tolerances than Fiducial marks during PCB fabrication. I would certainly recommend Fiducial recognition as a more reliable approach for better accuracy. You could re-calibrate the Vision system file used for
Electronics Forum | Fri Sep 03 03:49:24 EDT 2010 | sachu_70
In case of pure pattern recognition, i agree with your view. However, the basic functionality of the fiducial is determine any positional offset of the PCB and provide necessary data for correction during the intended operation such as Paste printing
Electronics Forum | Tue Aug 17 12:27:48 EDT 2010 | namruht
That reminds me...We already have home plate apertures on our stencil. Try number 2...I tried an overall reduction based on the copper layer of 10% and used oval apertures. I hope that you guys can suggest something that I am over looking. I know tha
Electronics Forum | Wed Sep 01 11:51:01 EDT 2010 | horvath83
It's a very small series. There's already a decision to redesign the board to get rid of QUAD BGA transformers. We'll replace them with 2x transformers in other packages. We'll also try to order lead-free smaller BGA's on the other side to unify th
Electronics Forum | Sat Sep 18 03:45:08 EDT 2010 | vinitverma
Before reinstalling, just take a system data backup of the machine. It'll create one floppy which you will use in the form of "System Data Restore" once you have reinstalled the software. By the way, you should have 2 CDs, one titled Application Soft