Electronics Forum | Fri Jan 29 14:53:13 EST 2010 | phase1
We aquired this reflow oven some time ago and finally have the need for it. Anyone who knows how to set up this machine and train an individual would be greatly appreciated. We are located in the Rockville Maryland Area. Power is run to the machine.
Electronics Forum | Fri Jan 29 13:31:19 EST 2010 | phase1
We aquired this reflow oven some time ago and finally have the need for it. Anyone who knows how to set up this machine and train an individual would be greatly appreciated. We are located in the Rockville Maryland Area. Power is run to the machine,
Electronics Forum | Fri Jan 11 07:26:07 EST 2008 | laplooi
Hi, me again. Who can tell me which software is availble for the Mirtec MV-2BTL? On this moment we working with Mirtec Inspector 3.4.2/7.50+ is this the only software which is availble for the MV-2BTL?
Electronics Forum | Tue Mar 25 05:35:58 EDT 2008 | fujillews
Hi We have large stocks of New Fuji Spare parts for all types CP2-7,IP1-3,QP1-3, XP & NXT. We have the parts you are looking for. see Alternativesmt.com for information or contact me on Llew@alternativesmt.com
Electronics Forum | Sat Nov 05 18:07:03 EDT 2016 | sarason
Are you aware of this program "MYdata TPsys CAD converter" http://www.rohrhofer.org/r-tec/ My program PCBSynergy , also does MyData TPSys 2.7 regards sarason
Electronics Forum | Sat Feb 10 10:01:25 EST 2018 | mdang
Could anyone help me how to create a new device package for inspection in Yestech software version 2.7. Thanks, -Michael
Electronics Forum | Mon Jun 14 08:50:56 EDT 2010 | whitewing
Just been quoted GBP500 for 5kg (2.7L) of Galden LS-230. Don;t know if the lower temp non-leadfree stuff is cheaper If anyone in the UK has a small qty they'd sell me for experimentation, (e.g. old non-leadfree stuff they no longer use) please get in
Electronics Forum | Tue Nov 06 12:43:31 EST 2012 | deanm
4.2.7.1 states, ...If the bake temperature is not greater than 90 °C, there is no practical limit on bake time... If I interpret that correctly, then you may keep MSDs in a 40 deg. C oven indefinitely with no adverse conditions. Instead of opting
Electronics Forum | Thu Feb 27 12:27:10 EST 2003 | stevel
Hi all, We got some bare pwb in our incoming inspecion looked really wrapped. The maximum twist of the pwb we messured is 0.056inch by following the method in IPC-TM-650 2.4.22 C. (The diagonal size of our pwb is 7.5inch) According to the IPC standa
Electronics Forum | Fri Oct 15 11:05:50 EDT 1999 | Mark Phinney
Earliar we had problems with board warpage, Much of our problem was due to imbalances in the copper on oppisite layers in brief on a 8 layer board the copper on layer 1 should = the copper on layer 8, 2=7, 3=6, 4 = 5. We added copper to some layers t